DESERT ROSE
PSP8
This tutorial was
written by Jemima ~ July 2004
Copyright © 2004 ~
Jemima ~ All rights reserved
********************************
You will
need the following to complete this
tutorial
Butterflies tube
download
Annissa 26 and Anissa 27 patterns
download
Extract to your PSP
Patterns folder
Eye Candy 3
download
Download and extract to your PSP Plugins Folder
DSB Flux
download
Download and extract to your PSP Plugins Folder
Right click and save this image to a
folder on your computer.
********************************
Go to your MATERIALS PALETTE
Load Light Tan ( #D6B585 ) into your
Background box
Load Dark Tan ( #A2735A ) into your
Foreground box
THEN
Click on the Pattern Icon on your
Foreground box
and
Load the "Annissa 27" pattern
Scale = 100
Angle = 0
Click on the Pattern Icon on your
Background box
and
Load the "Annissa 26" pattern
Scale = 100
Angle = 0
Your COLOUR PALETTE should look like this
********************************
Open up the Desert Rose image in your PSP
workspace.
Go to WINDOW >>> DUPLICATE
Close the original image
Go to EFFECTS >>> ILLUMINATION
EFFECTS >>> LIGHTS
Use these settings
COLOUR = #FFCF91
PRESET = Soft Light (top)
Click OK
BORDER 1
Go to IMAGE >>> ADD BORDERS = 3
COLOUR = LIGHT TAN ( #D6B585 )
With your MAGIC WAND
Match Mode = RGB Value
Tolerance = 0
Feather = 0
Sample Merged = UNCHECKED
Select the Light Tan border
Flood fill with the FOREground pattern
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to - (
minus ) 1
Click OK
Go to EFFECTS >>> Plugins
>>> Eye Candy 3 >>>
Drop Shadow
Use these settings
Click OK
DESELECT
BORDER 2
Go to IMAGE
>>> ADD BORDERS = 10
COLOUR = LIGHT TAN ( #D6B585 )
With your MAGIC WAND
Same settings
Select the Light Tan border
Flood fill with the BACKground pattern
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = - (
minus )1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to = 1
Click OK
DESELECT
Go to EFFECTS >>> EDGE EFFECTS
>>> ENHANCE
Go to
EFFECTS >>> 3D Effects
>>> Inner Bevel
Use these settings
Click OK
DESELECT
BORDER 3
Go to IMAGE >>> ADD BORDERS = 3
COLOUR = DARK TAN ( #A2735A )
With your MAGIC WAND
Same settings
Select the Dark Tan border
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to - (
minus ) 1
Click OK
DESELECT
BORDER 4
Go to IMAGE >>> ADD BORDERS = 3
COLOUR = LIGHT TAN
With your MAGIC WAND
Select the LIGHT Tan border
Flood fill with the FOREground pattern
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = - (
minus ) 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to 1
Click OK
DESELECT
BORDER 5
Go to IMAGE >>> ADD BORDERS = 10
COLOUR = DARK TAN
With your MAGIC WAND
Select the Dark Tan border
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to - (
minus ) 1
Click OK
Go to EFFECTS >>> 3D Effects
>>> Inner Bevel
Use the same settings
DESELECT
BORDER 6
Go to IMAGE >>> ADD BORDERS = 10
COLOUR = LIGHT TAN
With your MAGIC WAND
Select the LIGHT Tan border
Flood fill with the FOREground pattern
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = - (
minus ) 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to 1
Click OK
Go to EFFECTS >>> 3D Effects
>>> Inner Bevel
Use the same settings
DESELECT
BORDER 7
Go to IMAGE >>> ADD BORDERS = 3
COLOUR = DARK TAN
With your MAGIC WAND
Select the Dark Tan border
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to - (
minus ) 1
Click OK
DESELECT
BORDER 8
Go to IMAGE
>>> ADD BORDERS = 15
COLOUR = LIGHT TAN
With your MAGIC WAND
Select the LIGHT Tan border
Flood fill with the BACKground pattern
Go to EFFECTS >>> EDGE EFFECTS
>>> ENHANCE
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = - (
minus ) 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to 1
Click OK
Go to EFFECTS >>> 3D Effects
>>> Inner Bevel
Use the same settings
DESELECT
BORDER 9
Go to IMAGE
>>> ADD BORDERS = 15
COLOUR = DARK TAN
With your MAGIC WAND
Select the DARK Tan border
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = - (
minus ) 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to 1
Click OK
Go to EFFECTS >>> 3D Effects
>>> Inner Bevel
Use the same settings
DESELECT
*~*~*~*~*~*~*~*
Go to SELECTIONS
>>> SELECT ALL
Go to SELECTIONS >>> MODIFY
>>> CONTRACT = 33
Go to LAYERS
>>> DUPLICATE
Go to EDIT >>>CLEAR
Go to SELECTIONS
>>> INVERT
Go to EFFECTS >>> PLUGINS
>>> DSB FLUX >>>TILER
Use these settings
Click OK
The pattern effect on each side isn't the
same...
so ... to fix that....
Go to EFFECTS >>> PLUGINS
>>> DSB FLUX >>>MIRROR
Use these settings
Click OK
DESELECT
Go to IMAGE
>>> RESIZE
Use these settings
Click OK
Go to ADJUST >>> SHARPNESS
>>> SHARPEN
*~*~*~*~*~*~*~*
BORDER 10
Go to IMAGE >>> ADD BORDERS = 3
COLOUR = DARK TAN
With your MAGIC WAND
Select the Dark Tan border
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to - (
minus ) 1
Click OK
DESELECT
BORDER
11
Go to IMAGE
>>> ADD BORDERS = 10
COLOUR = LIGHT TAN
With your MAGIC WAND
Select the LIGHT Tan border
Flood fill with the FOREground pattern
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = - (
minus ) 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to 1
Click OK
Go to EFFECTS >>> 3D Effects
>>> Inner Bevel
Use the same settings
DESELECT
BORDER 12
Go to IMAGE >>> ADD BORDERS = 3
COLOUR = LIGHT TAN
With your MAGIC WAND
Select the LIGHT Tan border
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to - (
minus ) 1
Click OK
DESELECT
BORDER 13
Go to IMAGE
>>> ADD BORDERS = 3
COLOUR = DARK TAN
With your MAGIC WAND
Select the Dark Tan border
Go to EFFECTS >>> 3D Effects
>>> Drop Shadow
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 100
Blur = 0
Repeat Drop
Shadow effect changing
Vertical & Horizontal Offsets to - (
minus ) 1
Click OK
DESELECT
*~*~*~*~*~*~*~*
At this
point you can add the butterfly tube
provided to
the bottom of the frame.
I used it to break up the 'starkness' of the
frame.
I reduced it to 60%
before copying and pasting to the frame.
Go to ADJUST >>> SHARPNESS
>>> SHARPEN
then I used the Eye Candy Dropshadow
with the same settings
*~*~*~*~*~*~*~*
Resize to suit
Go to ADJUST >>> SHARPNESS
>>> SHARPEN
Save as a .jpg file.
*~*~*~*~*~*~*~*~*~
I would like to thank Cindy
from GRAFIXADDIX
for her assistance in testing this
tutorial *S*
This is Cindy's result
MAIN TUTORIAL INDEX
Page designed by
for
http://www.artistrypsp.com/
Copyright © 2000-2004 Artistry In PSP / PSP Artistry
All rights reserved.
Unless specifically made available for download,
no graphics or text may be removed from this site for any reason
without written permission from Artistry In PSP / PSP Artistry
|