COLOURS USED
|
STEP 1
Open a new image 800 x 600
Transparent background
PSPX - X2: Colour Depth = 8bits/channel
PSPX3-PSP2019: Colour Depth RGB = 8bits/channel
SELECTIONS >>> SELECT ALL
Open up the green-wave-design-vector image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE INTO SELECTION from the options.
DESELECT
,
|
STEP 2
With your MAGIC WAND
Mode = Replace
Match Mode = RGB Value
Tolerance = 20
Feather = 2
Antialias = Checked
Sample Merged = UNCHECKED
PSP9 - PSP2019: Check CONTIGUOUS
PSPX - PSP2019: There is no " Sample Merged"
PSP9 - PSP2019: Use all layers = UNChecked
PSP9 - PSP2019: ANTIALIAS = Outside .
Select the WHITE area indicated.
LAYERS >>> NEW RASTER LAYER
|
|
STEP 3
Open up the sky-clouds image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE INTO SELECTION from the options.
DO NOT DESELECT
|
|
STEP 4
LAYERS >>> NEW RASTER LAYER
Open up the Green_Meadows image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE INTO SELECTION from the options.
DESELECT |
|
STEP 5
VIEW >>> RULERS
Select your RASTER DEFORM tool
Mode = SCALE
use default settings
PSPX-PSP2019:Select your PICK tool
Move the centre top node down to the 100 pixel mark
on your left ruler |
|
STEP 6
Click the RESET RECTANGLE arrow
Select your MOVER tool to disengage
the Deformation / Pick tool
CLOSE Raster 2 and Raster 3
ACTIVATE Raster 1
With your MAGIC WAND ... Same settings
Select the WHITE area
SELECTIONS >>> INVERT
OPEN & ACTIVATE Raster 3
EDIT >>> CLEAR
DESELECT |
|
STEP 7
ADJUST >>> SHARPNESS >>> SHARPEN
OPEN Raster 2
LAYERS >>> MERGE >>> MERGE VISIBLE
Rename this layer BGD
SAVE YOUR WORK |
|
STEP 8
Open up the Shamrock1 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 200
Vertical Offset = 140
Edge Mode = Transparent
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical & Horizontal offsets = 4
Colour = Black
Opacity = 80
Blur = 7.00
Rename this layer SHAMROCK 1
|
|
STEP 9
CLOSE SHAMROCK 1
Open up the Shamrock2 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Same settings
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Same settings
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
Rename this layer SHAMROCK 2 |
|
STEP 10
CLOSE SHAMROCK 2
Open up the Shamrock3 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Same settings
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Same settings
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
Rename this layer SHAMROCK 3
SAVE YOUR WORK
|
|
STEP 11
Open up the CAL-1763-031217-ADJ image in your PSP workspace
Activate Raster 2
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 75%
Same settings
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 200
Vertical Offset = - ( minus ) 40
Edge Mode = Transparent
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
Rename this layer LEPRECHAUN 1 |
|
STEP 12
CLOSE LEPRECHAUN 1
Back to the CAL-1763-031217-ADJ image in your PSP workspace
Activate Raster 3
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 75%
Same settings
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Same settings
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
Rename this layer LEPRECHAUN 2 |
|
STEP 13
CLOSE LEPRECHAUN 2
Back to the CAL-1763-031217-ADJ image in your PSP workspace
Activate Raster 1
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 75%
Same settings
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 201
Vertical Offset = - ( minus ) 40
Edge Mode = Transparent
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
Rename this layer LEPRECHAUN 3
SAVE YOUR WORK |
|
STEP 14
Open up the Boots image in your PSP workspace
Activate boot1
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Same settings
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 190
Vertical Offset = - ( minus ) 160
Edge Mode = Transparent
Rename this layer BOOT 1 |
|
STEP 15
Back to the Boots image in your PSP workspace
Activate boot2
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Same settings
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 188
Vertical Offset = - ( minus ) 158
Edge Mode = Transparent
Rename this layer BOOT 2
|
|
STEP 16
CLOSE BOOT 2
Back to the Boots image in your PSP workspace
Activate boot3
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Same settings
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 188
Vertical Offset = - ( minus ) 112
Edge Mode = Transparent
Rename this layer BOOT 3
SAVE YOUR WORK |
|
STEP 17
LAYERS >>> NEW RASTER LAYER
SELECTIONS >>> SELECT ALL
Flood fill with BRIGHT GREEN #11830e
SELECTIONS >>> MODIFY >>> CONTRACT = 3
EDIT >>> CLEAR
Flood fill with PINK #feb9f4
SELECTIONS >>> MODIFY >>> CONTRACT = 3
EDIT >>> CLEAR
Flood fill with GREEN #618313
SELECTIONS >>> MODIFY >>> CONTRACT = 3
EDIT >>> CLEAR
Flood fill with ORANGE #f9a60c
SELECTIONS >>> MODIFY >>> CONTRACT = 3
EDIT >>> CLEAR
DESELECT
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical & Horizontal offsets = 4
Colour = Black
Opacity = 80
Blur = 7.00
Repeat Drop Shadow effect changing
Vertical & Horizontal Offsets to - ( minus ) 4
Click OK
Rename this layer FRAME
SAVE YOUR WORK |
|
STEP 18
ACTIVATE the BGD layer
Open up the Blessing2 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 55%
Same settings
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical offset = - ( minus ) 2
Horizontal offset = 2
Colour = Black
Opacity = 80
Blur = 5.00
LAYERS >>> MERGE >>> MERGE DOWN |
|
STEP 19
LAYERS >> NEW RASTER LAYER
Select your TEXT TOOL
with font and settings of your choice
add your name
LAYERS >>> MERGE >>> MERGE DOWN
SAVE YOUR WORK , |
|
STEP 20
Set up LAYER PALETTE as shown
Right click on Title Bar and select
Copy merged from the options
|
|
STEP 21
In ANIMATION SHOP
Right click the workspace and select
'Paste As New Animation' from the options.
Back to PSP.
Set up LAYER PALETTE as shown
Right click on Title Bar and select
Copy merged from the options, |
|
STEP 22
In ANIMATION SHOP
Select >>>
'Paste After Current' icon on top menu
Back to PSP.
Set up LAYER PALETTE as shown
Right click on Title Bar and select
Copy merged from the options,, |
|
STEP 23
Edit >> Select All
Edit >> Copy
Edit >> Paste After Current Frame
Edit >> Select All
Right click on Title Bar of frames
Select 'Frame Properties' from the options
Display time = 70
, |
STEP 24
View >> Animation
and while it is still running,
File >> Save As
Locate the folder in which you wish to save it.
Name your animation.
With the Gif Optimiser keep pressing NEXT
until you get to the last one... click FINISH
Close the Animation
Close the frames.
Close Animation Shop
, |
|
|
|
|