SPACECRAFT
PSP9 to PSP2018

This tutorial was written by Jemima ~ JANUARY 2018
Copyright © 2018 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

********************************

ANIMATION SHOP 3.11
Download HERE

********************************

Materials

ufo-140.png
SC-Frame.png
spacehip exit.pspimage
limite-cuvintepictate.jpg
Three-Eyes-Blue-Fur.png
astronaut_turntable_b.png
Save to a folder on your computer



Plugins

** NONE **

********************************
You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open up the spacehip exit image in your PSP workspace WINDOW >>> DUPLICATE Close the original Image ACTIVATE the foreground layer LAYERS >>> ARRANGE >>> BRING TO TOP SAVE your duplicated image ,
STEP 2 ACTIVATE the right door layer Rename it right door 1 LAYERS >>> DUPLICATE CLOSE right door 1 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 50 Vertical Offset = 0 Edge Mode = Transparent. Rename this layer right door 2
STEP 3 LAYERS >>> DUPLICATE CLOSE right door 2 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer right door 3
STEP 4 LAYERS >>> DUPLICATE CLOSE right door 3 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer right door 4
STEP 5 LAYERS >>> DUPLICATE CLOSE right door 4 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer right door 5 SAVE YOUR WORK
STEP 6 ACTIVATE the left door layer Rename it left door 1 LAYERS >>> DUPLICATE CLOSE left door 1 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - (minus) 50 Vertical Offset = 0 Edge Mode = Transparent. Rename this layer left door 2
STEP 7 LAYERS >>> DUPLICATE CLOSE left door 2 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer left door 3
STEP 8 LAYERS >>> DUPLICATE CLOSE left door 3 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer left door 4
STEP 9 LAYERS >>> DUPLICATE CLOSE left door 4 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer left door 5
STEP 10 OPEN ALL LAYERS Rearrange the layers as shown.
STEP 11 With left door 1 active LAYERS >>> MERGE >>> MERGE DOWN Rename this layer door 1 ACTIVATE left door 2 Edit >>> Repeat Layer Merge Down Rename this layer door 2 ACTIVATE left door 3 Edit >>> Repeat Layer Merge Down Rename this layer door 3 ACTIVATE left door 4 Edit >>> Repeat Layer Merge Down Rename this layer door 4 ACTIVATE left door 5 Edit >>> Repeat Layer Merge Down Rename this layer door 5 CLOSE layers door 1 to door 4 SAVE YOUR WORK ,
STEP 12 LAYERS >>> NEW RASTER LAYER LAYERS >>> ARRANGE >>> SEND TO BOTTOM Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 13 Open up the limite-cuvintepictate image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DESELECT Rename this layer background SAVE YOUR WORK
STEP 14 Open up the ufo-140 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 40% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 175 Vertical Offset = 20 Edge Mode = Transparent Rename this layer ship 1
STEP 15 LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 100 Vertical Offset = 0 Edge Mode = Transparent Rename this layer ship 2
STEP 16 LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer ship 3 ~~~~~~~~~~~~~~~~~~ LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer ship 4 ~~~~~~~~~~~~~~~~~~ LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings Rename this layer ship 5 SAVE YOUR WORK
STEP 17 CLOSE ALL THE ship layers ACTIVATE the background layer Open up the Three-Eyes-Blue-Fur image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 35% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - (minus) 155 Vertical Offset = - (minus) 115 Edge Mode = Transparent.
STEP 18 LAYERS >>> DUPLICATE LAYERS >>> ARRANGE >>> MOVE UP and CLOSE layer OPEN & ACTIVATE ship 1 layer LAYERS >>> MERGE >>> MERGE DOWN Rename this layer ship 1 SAVE YOUR WORK
STEP 19 CLOSE ship 1 layer OPEN & ACTIVATE Copy of Raster 1 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 100 Vertical Offset = 0 Edge Mode = Transparent. LAYERS >>> DUPLICATE LAYERS >>> ARRANGE >>> MOVE UP and CLOSE layer OPEN & ACTIVATE ship 2 LAYERS >>> MERGE >>> MERGE DOWN Rename this layer ship 2
STEP 20 CLOSE ship 2 layer OPEN & ACTIVATE Copy (2) of Raster 1 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings LAYERS >>> DUPLICATE LAYERS >>> ARRANGE >>> MOVE UP and CLOSE layer OPEN & ACTIVATE ship 3 LAYERS >>> MERGE >>> MERGE DOWN Rename this layer ship 3 SAVE YOUR WORK
STEP 21 CLOSE ship 3 layer OPEN & ACTIVATE Copy (3) of Raster 1 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings LAYERS >>> DUPLICATE LAYERS >>> ARRANGE >>> MOVE UP and CLOSE layer OPEN & ACTIVATE ship 4 LAYERS >>> MERGE >>> MERGE DOWN Rename this layer ship 4
STEP 22 CLOSE ship 4 layer OPEN & ACTIVATE Copy (4) of Raster 1 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Same settings OPEN & ACTIVATE ship 5 LAYERS >>> MERGE >>> MERGE DOWN Rename this layer ship 5 SAVE YOUR WORK
STEP 23 ACTIVATE the foreground layer Open up the astronaut_turntable_b image in your PSP workspace Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the far right astronaut Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ,
STEP 24 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 105 Vertical Offset = - ( minus ) 105 Edge Mode = Transparent Rename this layer man 1
STEP 25 CLOSE man 1 Open up the astronaut_turntable_b image in your PSP workspace Choose your SELECTION TOOL Select the second from the right astronaut Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 70 Vertical Offset = - ( minus ) 105 Edge Mode = Transparent Rename this layer man 2
STEP 26 CLOSE man 2 Open up the astronaut_turntable_b image in your PSP workspace Choose your SELECTION TOOL Select the centre astronaut Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 25 Vertical Offset = - ( minus ) 105 Edge Mode = Transparent Rename this layer man 3
STEP 27 CLOSE man 3 Open up the astronaut_turntable_b image in your PSP workspace Choose your SELECTION TOOL Select the second from the left astronaut Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 35 Vertical Offset = - ( minus ) 105 Edge Mode = Transparent Rename this layer man 4
STEP 28 CLOSE man 4 Open up the astronaut_turntable_b image in your PSP workspace Choose your SELECTION TOOL Select the left astronaut Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 105 Vertical Offset = - ( minus ) 105 Edge Mode = Transparent Rename this layer man 5 SAVE YOUR WORK
STEP 29 Open up the SC-Frame image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 4 Colour = Black Opacity = 65 Blur = 10.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 4 Click OK Rename this layer frame
STEP 30 ACTIVATE the foreground layer LAYERS >>> NEW RASTER LAYER SELECT your TEXT tool With a font of your choice add your name LAYERS >>> MERGE >>> MERGE DOWN SAVE YOUR WORK
STEP 31 Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 32 In ANIMATION SHOP Right click the workspace and select 'Paste As New Animation' from the options. Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 33 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 34 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 35 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 36 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 37 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 38 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 39 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 40 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 40 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 41 In ANIMATION SHOP Right click the workspace and select 'Paste As New Animation' from the options. Edit >> Select All Right click on Title Bar of frames Select 'Frame Properties' from the options Display time = 70 ,
STEP 42 Right click inside the first frame (F:1) to activate Select 'Frame Properties' from the options Display time = 100 ,
STEP 43 View >> Animation and while it is still running, File >> Save As Locate the folder in which you wish to save it. Name your animation. With the Gif Optimiser keep pressing NEXT until you get to the last one... click FINISH Close the Animation Close the frames. Close Animation Shop ,

Page designed by



for