HALLOWEEN 2018
PSP9 to PSP2019

This tutorial was written by Jemima ~ SEPTEMBER 2018
Copyright © 2018 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

Tube_268.pspimage
orange_black_bgd.jpg
Leny-halloween48.psp
WordArt10-12-14-LM.png
Renee_tube_haunted-master.pspimage
castorke_hal_tube_14_092012.pspimage
JeanBaptisteDonge~WitchAndTrolley~S~manon.pspimage
Save to a folder on your computer

********************************

Plugins

** NONE **


********************************

You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open up the orange_black_bgd image in your PSP workspace WINDOW >>> DUPLICATE Close the original Image LAYERS >>> Promote background layer LAYERS >>> DUPLICATE EDIT >>> Repeat Duplicate CLOSE Copy of Raster 1 and Copy (2) of Raster 1 ACTIVATE Raster 1 .
STEP 2 EFFECTS>>> GEOMETRIC EFFECTS >>> Perspective Horizontal.
STEP 3 EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 0 Vertical Offset = n/a Rotation Angle = 0 Edge Mode = Reflect.
STEP 4 EFFECTS >>> DISTORTION EFFECTS >>> PIXELATE Block Width = 29 Block Height = 29 Symmetric = Checked EFFECTS >>> EDGE EFFECTS >>> ENHANCE SAVE YOUR WORK
STEP 5 OPEN & ACTIVATE Copy of Raster 1 EFFECTS>>> GEOMETRIC EFFECTS >>> Perspective Horizontal. Same settings EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 0 Vertical Offset = n/a Rotation Angle = 0 Edge Mode = Reflect EFFECTS>>> GEOMETRIC EFFECTS >>> SPHERIZE
STEP 6 IMAGE >>> RESIZE = 80% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE EFFECTS >>> DISTORTION EFFECTS >>> PUNCH Strength = 50% PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED PSPX - PSP2019: IMAGE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 0 Vertical Offset = n/a Rotation Angle = 180 Edge Mode = Reflect
STEP 7 EFFECTS>>> GEOMETRIC EFFECTS >>> SPHERIZE Same settings IMAGE >>> RESIZE = 85% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE VIEW >>> RULERS Select your RASTER DEFORM tool Mode = SCALE use default settings PSPX - PSP2019:Select your PICK tool Move the centre left node level with the 20 pixel mark on the top ruler Move the centre right node level with the 780 pixel mark on the top ruler,
STEP 8 Click the RESET RECTANGLE arrow Select the MOVER tool to disengage the DEFORMATION tool (PICK tool) EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 100 Blur = 10.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 5 Click OK ,
STEP 9 OPEN & ACTIVATE Copy (2) of Raster 1 IMAGE >>> RESIZE = 85% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Open up the castorke_hal_tube_14_092012 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 85% Same settings
STEP 10 Open up the Tube_268 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 25% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 130 Vertical Offset = 135 Edge Mode = Transparent, SAVE YOUR WORK
STEP 11 Open up the Leny-halloween48 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 40% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 170 Vertical Offset = - ( minus ) 100 Edge Mode = Transparent, In your LAYER PALETTE change the BLEND MODE to LUMINANCE (L)
STEP 12 Open up the JeanBaptisteDonge~WitchAndTrolley~S~manon image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 50% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 155 Vertical Offset = - ( minus ) 100 Edge Mode = Transparent, SAVE YOUR WORK
STEP 13 In your MATERIALS PALETTE Load ORANGE " #d65d06 " in your foreground Load BLACK " #000000 " in your background ACTIVATE Copy (2) of Raster 1 With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - PSP2019: Check CONTIGUOUS PSPX - PSP2019: There is no " Sample Merged" PSP9 - PSP2019: Use all layers = UNChecked Select the OUTER area indicated,
STEP 14 SELECTIONS >>> INVERT LAYERS >>> NEW RASTER LAYER LAYERS >>> ARRANGE >>> BRING TO TOP Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR Flood fill with ORANGE SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR Flood fill with ORANGE SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT
STEP 15 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 100 Blur = 10.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 5 Click OK SAVE YOUR WORK ,
STEP 16 Open up the WordArt10-12-14-LM image in your PSP workspace Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the lower left word art Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - PSP2019: IMAGE >>> NEGATIVE IMAGE ,
STEP 17 IMAGE >>> RESIZE = 80% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 225 Vertical Offset = 135 Edge Mode = Transparent LAYERS >>> MERGE >>> MERGE VISIBLE SAVE YOUR WORK
STEP 18 Open up the Renee_tube_haunted-master image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 45% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN ,
STEP 19 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 305 Vertical Offset = - ( minus ) 125 Edge Mode = Transparent
STEP 20 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical offset = - ( minus ) 10 Horizontal offset = 20 Colour = GREEN #c6f169 Opacity = 75 Blur = 40.00 LAYERS >>> MERGE >>> MERGE VISIBLE SAVE YOUR WORK
STEP 21 LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR Flood fill with ORANGE SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR Flood fill with ORANGE SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT
STEP 22 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 100 Blur = 10.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 5 Click OK LAYERS >>> MERGE >>> MERGE VISIBLE
STEP 23 LAYERS >>> NEW RASTER LAYER SELECT your TEXT tool With a font of your choice add your name
STEP 24 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for