STEP 1
Open a new image 800 x 600
Transparent background
PSP9: Colour Depth = 16 Million Colors (24bit)
PSPX-PSP2018: Colour Depth RGB = 8bits/channel
VIEW >>> RULERS
Choose your SELECTION TOOL then click on the
CUSTOM SELECTION symbol and enter these coordinates. |
|
STEP 2
Open up the sky-picture-4 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE INTO SELECTION from the options.
DESELECT
.
|
|
STEP 3
LAYERS >>> NEW RASTER LAYER
CLOSE Raster 1
SELECTIONS >>> SELECT ALL
Open up the chess_board_by_markhal image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE INTO SELECTION from the options.
DESELECT
.
|
STEP 4
EFFECTS>>> GEOMETRIC EFFECTS >>> Perspective Vertical
|
|
STEP 5
Pull out the edges of your image
Select your RASTER DEFORM tool
Mode = SCALE
use default settings
PSPX - PSP2018:Select your PICK tool
Move the centre top node down level with the 400 pixel mark
on your left ruler
Pull out the centre left and right nodes of your image as shown
Click the RESET RECTANGLE arrow
Select the SELECTION tool to disengage the DEFORMATION tool (PICK tool)
,
|
STEP 6
With your SELECTION TOOL then click on the
CUSTOM SELECTION symbol and enter these coordinates.
|
|
STEP 7
SELECTIONS >>> INVERT
EDIT >>> CLEAR
DESELECT
Pull out the edges of your image
Select your RASTER DEFORM tool
Mode = Shear (Shift)
use default settings
PSPX - PSP2018:Select your PICK tool
Pull out the top left and top right nodes as shown
below.
(If you hold down CTRL key pull the top node out and both will move together)
Click the RESET RECTANGLE arrow
Select the SELECTION tool to disengage the DEFORMATION tool (PICK tool)
SAVE YOUR WORK
|
STEP 8
With your SELECTION TOOL
Selection Type = Rectangle
Mode = Replace
Feather = 40
Antialias = Checked
Posiion your cursor at 350 pixels down and 0 pixels across
and pull down to 420 pixels down and 800 pixels across
and release.
EDIT >>> CLEAR
EDIT >>> Repeat Edit Clear
DESELECT
OPEN Raster 1
Keep Raster 2 active
SAVE YOUR WORK
|
STEP 9
Open up the Columns_with_Vines image in your PSP workspace
Choose your SELECTION TOOL
Selection Type = Rectangle
Mode = Replace
Feather = 0
Antialias = UNChecked
Select the left column
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 265
Vertical Offset = 0
Edge Mode = Transparent
|
|
STEP 10
LAYERS >>> DUPLICATE
PSP9 - PSPX3: IMAGE >>> MIRROR
PSPX4 - PSP2018: Use script available for download at top of page.
(Higher versions follow your version's method)
Back to the Columns_with_Vines image in your PSP workspace
With your SELECTION TOOL
Select the right column
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
PSP9 - PSPX3: IMAGE >>> MIRROR
PSPX4 - PSP2018: Use script available for download at top of page.
(Higher versions follow your version's method)
IMAGE >>> RESIZE = 50%
Check "Lock aspect ratio."
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
,
|
|
STEP 11
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 110
Vertical Offset = - ( minus ) 20
Edge Mode = Transparent
LAYERS >>> DUPLICATE
PSP9 - PSPX3: IMAGE >>> MIRROR
PSPX4 - PSP2018: Use script available for download at top of page.
(Higher versions follow your version's method)
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 45
Vertical Offset = 0
Edge Mode = Transparent
SAVE YOUR WORK
|
|
STEP 12
ACTIVATE Raster 1
Open up the artdeco-42 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 25
Vertical Offset = 5
Edge Mode = Transparent |
|
STEP 13
ACTIVATE Raster 1
Open up the ForHealth image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 25%
Check "Lock aspect ratio."
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 25
Vertical Offset = - ( minus ) 22
Edge Mode = Transparent,
SAVE YOUR WORK
|
|
STEP 14
ACTIVATE Raster 2
Open up the fashion in black image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 45%
Check "Lock aspect ratio."
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 210
Vertical Offset = - ( minus ) 75
Edge Mode = Transparent,
|
|
STEP 15
ACTIVATE Copy of Raster 4
Open up the stylized birds image in your PSP workspace
With your SELECTION TOOL .... Same settings
Select the top left bird
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 120
Vertical Offset = 125
Edge Mode = Transparent, |
|
STEP 16
Back to the stylized birds image in your PSP workspace
With your SELECTION TOOL .... Same settings
Select the bottom right bird
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 165
Vertical Offset = 120
Edge Mode = Transparent |
|
STEP 17
Open up the fashion18 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 45%
Check "Lock aspect ratio."
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 250
Vertical Offset = - ( minus ) 100
Edge Mode = Transparent,
SAVE YOUR WORK |
|
STEP 18
LAYERS >>> NEW RASTER LAYER
Flood fill with BLACK
SELECTIONS >>> SELECT ALL
SELECTIONS >>> MODIFY >>> CONTRACT = 1
EDIT >>> CLEAR
DESELECT
, |
STEP 19
Open up the check-bgd image in your PSP workspace
and minimize
In your MATERIALS PALETTE load
check-bgd pattern in the foreground
using these settings
( It will be at the beginning of your pattern selections ) |
|
STEP 20
LAYERS >>> NEW RASTER LAYER
Flood fill with PATTERN
SELECTIONS >>> SELECT ALL
SELECTIONS >>> MODIFY >>> CONTRACT = 6
EDIT >>> CLEAR
Flood fill with BLACK
SELECTIONS >>> MODIFY >>> CONTRACT = 1
EDIT >>> CLEAR
DESELECT |
|
STEP 21
LAYERS >>> DUPLICATE
IMAGE >>> RESIZE = 98%
Check "Lock aspect ratio."
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
PSP9 - PSPX3: IMAGE >>> FLIP
PSPX4 - PSP2018: Use script available for download at top of page.
(Higher versions follow your version's method)
LAYERS >>> MERGE >>> MERGE DOWN
LAYERS >>> ARRANGE >>> SEND TO BOTTOM
LAYERS >>> ARRANGE >>> MOVE UP
SAVE YOUR WORK |
|
STEP 22
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical & Horizontal offsets = 6
Colour = Black
Opacity = 60
Blur = 10.00
Repeat Drop Shadow effect changing
Vertical & Horizontal Offsets to - ( minus ) 6
Click OK |
|
STEP 23
ACTIVATE Copy of Raster 4
LAYERS >>> MERGE >>> MERGE DOWN
ACTIVATE Copy of Raster 3
LAYERS >>> MERGE >>> MERGE DOWN
ACTIVATE Raster 9
LAYERS >>> MERGE >>> MERGE DOWN
, |
STEP 24
ACTIVATE Raster 10
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical offset = - ( minus ) 3
Horizontal offset = 3
Colour = Black
Opacity = 60
Blur = 10.00
ACTIVATE Raster 8
EDIT >>> Repeat Drop Shadow
ACTIVATE Raster 4
EDIT >>> Repeat Drop Shadow
ACTIVATE Raster 3
EDIT >>> Repeat Drop Shadow
ACTIVATE Raster 7
EDIT >>> Repeat Drop Shadow
ACTIVATE Raster 5
EDIT >>> Repeat Drop Shadow
ACTIVATE Raster 6
EDIT >>> Repeat Drop Shadow
LAYERS >>> MERGE >>> MERGE VISIBLE
SAVE YOUR WORK |
STEP 25
LAYERS >>> NEW RASTER LAYER
SELECT your TEXT tool
With a font of your choice add your name , |
|
STEP 26
LAYERS >>> MERGE >>> MERGE ALL (Flatten)
Save as .jpg image
, |
|
|
|
|