DOUBLE DELIGHT
PSP9 to PSP2018

This tutorial was written by Jemima ~AUGUST 2018
Copyright © 2018 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

wave-2.png
corners23.png
gnarl-curve.png
JF_deco 45.png
KamilTubes-541.png
Save to a folder on your computer

********************************
Plugins

SIMPLE
MIRROR RAVE

** PLUGINS_LINKS **
HERE

********************************

You can drag this hand down the page with you to keep your place in the tut.

COLOURS USED
STEP 1 Open a new image 800 x 600 Transparent background PSP9: Colour Depth = 16 Million Colors (24bit) PSPX - PSP2018: Colour Depth RGB = 8bits/channel Flood fill with ORANGE #db7c3e .
STEP 2 Open up the gnarl-curve image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. LAYERS >>> DUPLICATE CLOSE Copy of Raster 2 ACTIVATE Raster 2
STEP 3 EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 0 Vertical Offset = n/a Rotation Angle = 180 Edge Mode = Reflect. EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 4 Colour = Black Opacity = 60 Blur = 5.00
STEP 4 LAYERS >>> MERGE >>> MERGE DOWN IMAGE >>> RESIZE = 85% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X9: Check CONTIGUOUS PSPX - PSP2018: There is no " Sample Merged" Select the OUTER transparent area
STEP 5 SELECTIONS >>> INVERT LAYERS >>> NEW RASTER LAYER EFFECTS >>> 3D EFFECTS >>> BUTTONIZE COLOR = #f0c869
STEP 6 DESELECT EFFECTS >>> PLUGINS >>> Mirror Rave >>> Quadrant Flip
STEP 7 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 4 Colour = Black Opacity = 60 Blur = 5.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 4 Click OK SAVE YOUR WORK
STEP 8 OPEN & ACTIVATE Copy of Raster 2 EFFECTS >>> DISTORTION EFFECTS >>> WARP ,
STEP 9 EFFECTS >>> PLUGINS >>> Mirror Rave >>> Quadrant Flip Same settings EFFECTS >>> DISTORTION EFFECTS >>> PIXELATE Block width = 29 Block height = 29 Symmetric = Checked EFFECTS >>> EDGE EFFECTS >>> ENHANCE MORE
STEP 10 LAYERS >>> ARRANGE >>> SEND TO BOTTOM CLOSE Raster 1 and Raster 2 Open up the wave-2 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 0 Vertical Offset = n/a Rotation Angle = 0 Edge Mode = Reflect. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = 65 Edge Mode = Transparent
STEP 11 ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - PSP2018: IMAGE >>> NEGATIVE IMAGE LAYERS >>> DUPLICATE PSP9 - PSPX3: IMAGE >>> FLIP PSPX4 - PSPX7: Use script available for download at top of page. (Higher versions follow your version's method) LAYERS >>> MERGE >>> MERGE DOWN SAVE YOUR WORK
STEP 12 OPEN Raster 1 and Raster 2 ACTIVATE Raster 2 Open up the corners23 image in your PSP workspace Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the top left image Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 65% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN ,
STEP 13 ADJUST >>> HUE & SATURATION >>> COLORIZE Hue = 20 Saturation = 75 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 265 Vertical Offset = 190 Edge Mode = Transparent EFFECTS >>> PLUGINS >>> SIMPLE >>> TOP LEFT MIRROR SAVE YOUR WORK
STEP 14 Open up the JF_deco 45 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 65% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE PSP9 - PSPX3: IMAGE >>> FLIP PSPX4 - PSPX7: Use script available for download at top of page. (Higher versions follow your version's method) EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 280 Vertical Offset = 192 Edge Mode = Transparent
STEP 15 ACTIVATE Raster 2 LAYERS >>> ARRANGE >>> BRING TO TOP ACTIVATE Raster 5 ADJUST >>> HUE & SATURATION >>> COLORIZE Hue = 20 Saturation = 75 LAYERS >>> DUPLICATE CLOSE Copy of Raster 5 ACTIVATE Raster 5 EFFECTS >>> PLUGINS >>> SIMPLE >>> TOP LEFT MIRROR,
STEP 16 ACTIVATE Raster 3 LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR Flood fill with YELLOW #dec101 SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Flood fill with ORANGE #db7c3e SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR DO NOT DESELECT,
STEP 17 Flood fill with YELLOW #dec101 SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Flood fill with ORANGE #db7c3e SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Flood fill with BLACK SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT SAVE YOUR WORK
STEP 18 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 4 Colour = Black Opacity = 60 Blur = 10.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 4 Click OK ACTIVATE Raster 3 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 60 Blur = 0.00
STEP 19 OPEN & ACTIVATE Copy of Raster 5 IMAGE >>> RESIZE = 45% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. DELETE Copy of Raster 5 ACTIVATE Raster 7 EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 0 Vertical Offset = n/a Rotation Angle = 180 Edge Mode = Reflect
STEP 20 PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED PSPX - PSP2018: IMAGE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED LAYERS >>> ARRANGE >>> MOVE UP EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 355 Vertical Offset = 95 Edge Mode = Transparent EFFECTS >>> PLUGINS >>> SIMPLE >>> TOP LEFT MIRROR,
STEP 21 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 2 Colour = Black Opacity = 60 Blur = 5.00 ACTIVATE Raster 5 EDIT >>> Repeat Drop Shadow SAVE YOUR WORK
STEP 22 ACTIVATE Raster 1 Open up the KamilTubes-541 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 65% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN ,
STEP 23 Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select and DELETE the tuber image EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 25 Vertical Offset = - ( minus ) 11 Edge Mode = Transparent
STEP 24 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 70 Blur = 10.00 SAVE YOUR WORK ,
STEP 25 ACTIVATE Raster 2 LAYERS >>> ARRANGE >>> MOVE DOWN EDIT >>> Repeat Move Layer Down ACTIVATE Raster 5 Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 26 SELECTIONS >>> INVERT EDIT >>> CLEAR DESELECT
STEP 27 LAYERS >>> MERGE >>> MERGE VISIBLE LAYERS >>> NEW RASTER LAYER Select your TEXT tool and with a font of your choice add your name,
STEP 28 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for