BORED
PSP9 to PSP2018

This tutorial was written by Jemima ~ AUGUST 2018
Copyright © 2018 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

vine.png
Singapura.png
bored.pspimage
transparent_valley.png
2Muisjes3042016es.png
vectors_line_gradient.png
CAL-1625-012917.pspimage
CAL-1625-012917.pspimage copyrighted by Veronica Minozzi
Save to a folder on your computer

White dots.jpg
Save to your PSP Patterns folder

********************************

Plugins

** NONE **

********************************

You can drag this hand down the page with you to keep your place in the tut.

COLOURS USED
STEP 1 Open a new image 800 x 600 Transparent background PSP9: Colour Depth = 16 Million Colors (24bit) PSPX-PSP2018: Colour Depth RGB = 8bits/channel Open up the 2Muisjes3042016es image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select and delete tuber text. .
STEP 2 IMAGE >>> RESIZE = 70 % Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN LAYERS >>> DUPLICATE PSP9 - PSPX3: IMAGE >>> MIRROR PSPX4 - PSP2018: Use script available for download at top of page. (Higher versions follow your version's method) EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 50 Vertical Offset = 90 Edge Mode = Transparent. LAYERS >>> ARRANGE >>> MOVE DOWN
STEP 3 ACTIVATE Raster 2 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 50 Vertical Offset = 90 Edge Mode = Transparent. CLOSE Raster 2 ACTIVATE Copy of Raster 2 Choose your FREEHAND SELECTION TOOL Selection Type = Point to Point Mode = Replace Feather = 1 Smoothing = 5 Antialias = Checked Select area indicated .
STEP 4 EDIT >>> CLEAR DESELECT OPEN Raster 2 CLOSE Raster 1 LAYERS >>> MERGE >>> MERGE VISIBLE SAVE YOUR WORK
STEP 5 In your MATERIALS PALETTE Load LIGHT GREEN " #c8df2a " in your foreground Load DARK GREEN " #5c6e03 " in your background LAYERS >>> NEW RASTER LAYER Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 6 Flood fill with DARK GREEN SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR Flood fill with LIGHT GREEN SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR Flood fill with DARK GREEN SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT SAVE YOUR WORK
STEP 7 OPEN & ACTIVATE Raster 1 LAYERS >>> NEW RASTER LAYER Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 8 Open up the vectors_line_gradient image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DESELECT
STEP 9 Open up the CAL-1625-012917 image in your PSP workspace Activate Raster 1 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 45% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 5 Vertical Offset = 170 Edge Mode = Transparent
STEP 10 Choose your SELECTION TOOL... Same settings Select the area indicated at top of image from 250 to 540 on top ruler ,
STEP 11 EDIT >>> CLEAR DESELECT In your MATERIALS PALETTE Load MID GREEN " #82971a " in your foreground ACTIVATE Raster 1 Flood fill with MID GREEN
STEP 12 In your MATERIALS PALETTE load White dots pattern in the foreground using these settings
STEP 13 ACTIVATE Raster 2 With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - PSP2018: Check CONTIGUOUS PSPX - PSP2018: There is no " Sample Merged" PSP9 - PSP2018: Use all layers = UNChecked, Select the area outside the border ,
STEP 14 ACTIVATE Raster 1 LAYERS >>> NEW RASTER LAYER Flood fill with White dots pattern DESELECT In your LAYER PALETTE change the BLEND MODE to BURN SAVE YOUR WORK
STEP 15 Open up the transparent_valley image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. LAYERS >>> DUPLICATE PSP9 - PSPX3: IMAGE >>> FLIP PSPX4 - PSP2018: Use script available for download at top of page. (Higher versions follow your version's method) PSP9 - PSPX3: IMAGE >>> MIRROR PSPX4 - PSP2018: Use script available for download at top of page. (Higher versions follow your version's method)
STEP 16 LAYERS >>> MERGE >>> MERGE DOWN In your LAYER PALETTE change the BLEND MODE to LUMINANCE (L)
STEP 17 ACTIVATE Raster 2 LAYERS >>> NEW RASTER LAYER Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 18 Flood fill with MID GREEN #82971a SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR SELECTIONS >>> MODIFY >>> CONTRACT = 2 Flood fill with MID GREEN #82971a SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR SELECTIONS >>> MODIFY >>> CONTRACT = 2 Flood fill with MID GREEN #82971a SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT ADJUST >>> SHARPNESS >>> SHARPEN MORE SAVE YOUR WORK
STEP 19 Open up the vine image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 325 Vertical Offset = 0 Edge Mode = Transparent LAYERS >>> DUPLICATE PSP9 - PSPX3: IMAGE >>> MIRROR PSPX4 - PSP2018: Use script available for download at top of page. (Higher versions follow your version's method) LAYERS >>> MERGE >>> MERGE DOWN LAYERS >>> ARRANGE >>> MOVE DOWN
STEP 20 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 80 Blur = 10.00 ACTIVATE Raster 2 EDIT >>> Repeat Drop Shadow ACTIVATE the Merged layer EDIT >>> Repeat Drop Shadow ACTIVATE Raster 2 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 5 Click OK
STEP 21 ACTIVATE Raster 7 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 2 Colour = Black Opacity = 100 Blur = 2.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 2 Click OK LAYERS >>> MERGE >>> MERGE VISIBLE SAVE YOUR WORK
STEP 22 Open up the Singapura image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 50% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN PSP9 - PSPX3: IMAGE >>> MIRROR PSPX4 - PSP2018: Use script available for download at top of page. (Higher versions follow your version's method) ,
STEP 23 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 240 Vertical Offset = - ( minus ) 160 Edge Mode = Transparent EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 70 Blur = 15.00
STEP 24 Open up the bored image in your PSP workspace Activate Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 150 Vertical Offset = - ( minus ) 190 Edge Mode = Transparent LAYERS >>> MERGE >>> MERGE VISIBLE SAVE YOUR WORK
STEP 25 LAYERS >>> NEW RASTER LAYER SELECT your TEXT tool With a font of your choice add your name LAYERS >>> MERGE >>> MERGE VISIBLE
STEP 26 LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL Flood fill with DARK GREEN #5c6e03 SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR DESELECT
STEP 27 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for