POGO CLOWN
PSP9 to PSPX9

This tutorial was written by Jemima ~ FEBRUARY 2017
Copyright © 2017 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

********************************

ANIMATION SHOP 3.11
Download HERE

********************************

Materials

tent.png
cb39.png
2630.png
7141.png
7327.png
pogo.pspimage
scene-2243.jpg
pogo frame.png
Save to a folder on your computer


Plugins

** NONE**

********************************
You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open up the pogo image in your PSP workspace WINDOW >>> DUPLICATE Close the original Image CLOSE Raster 1 ACTIVATE Raster 2 LAYERS >>> DUPLICATE CLOSE Raster 2 ACTIVATE Copy of Raster 2 ,
STEP 2 Choose your FREEHAND SELECTION TOOL Selection Type = Point to Point Mode = Replace Feather = 1 Smoothing = 6 Antialias = Checked Select the area indicated.
STEP 3 EDIT >>> CLEAR DESELECT Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the area indicated.
STEP 4 Click inside the marching ants rectangle to select the image. Move up with your MOVER TOOL
STEP 5 DESELECT LAYERS >>> DUPLICATE CLOSE Copy of Raster 2 ACTIVATE Copy (2) of Raster 2 Repeat STEPS 2, 3 and 4 DESELECT LAYERS >>> DUPLICATE
STEP 6 CLOSE Copy (2) of Raster 2 ACTIVATE Copy (3) of Raster 2 Repeat STEPS 2, 3 and 4 DESELECT LAYERS >>> DUPLICATE
STEP 7 CLOSE Copy (3) of Raster 2 ACTIVATE Copy (4) of Raster 2 Repeat STEPS 2, 3 and 4 DESELECT
STEP 8 IMAGE >>> RESIZE = 70% Resample using WEIGHTED AVERAGE Check "Lock aspect ratio" Check "Resize all layers " SAVE YOUR WORK
STEP 9 Open a new image 700 x 600 Transparent background PSPX - X2: Colour Depth = 8bits/channel PSPX3-X9: Colour Depth RGB = 8bits/channel Return to your duplicated clown image. OPEN ALL LAYERS ACTIVATE Raster 1 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> SHARPNESS >>> SHARPEN
STEP 10 Return to your duplicated clown image. ACTIVATE Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 10 Vertical Offset = 5 Edge Mode = Transparent Rename this layer clown1
STEP 11 Return to your duplicated clown image. ACTIVATE Copy of Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 10 Vertical Offset = 0 Edge Mode = Transparent Rename this layer clown2
STEP 12 Return to your duplicated clown image. ACTIVATE Copy (2) of Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 4 Vertical Offset = - ( minus ) 5 Edge Mode = Transparent Rename this layer clown3
STEP 13 Return to your duplicated clown image. ACTIVATE Copy (3) of Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = - ( minus ) 10 Edge Mode = Transparent Rename this layer clown4
STEP 14 Return to your duplicated clown image. ACTIVATE Copy (4) of Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 1 Vertical Offset = - ( minus ) 12 Edge Mode = Transparent Rename this layer clown5 SAVE YOUR WORK
STEP 15 CLOSE ALL clown layers ACTIVATE Raster 2 LAYERS >>> DUPLICATE IMAGE >>> MIRROR Rename this layer Raster 3 SAVE YOUR WORK ,
STEP 16 CLOSE Raster 2 and Raster 3 ACTIVATE Raster 1 SELECTIONS >>> SELECT ALL Open up the scene-2243 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DESELECT Rename this layer bgd ,
STEP 17 Open up the tent.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 70% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Check "Lock aspect ratio" UNCheck "Resize all layers " ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 105 Vertical Offset = - ( minus ) 65 Edge Mode = Transparent
STEP 18 With your MAGIC WAND Mode = ADD (Shift) Match Mode = RGB Value Tolerance = 28 Feather = 1 Antialias = Checked Sample Merged = UNCHECKED PSP9 - X9: Check CONTIGUOUS PSPX - X9: There is no " Sample Merged" PSPX - X9: Use all layers = UNChecked PSP9 - X9: ANTIALIAS = Inside Select the RED areas indicated.
STEP 19 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL
STEP 20 DESELECT With your MAGIC WAND.... Same settings. BUT change TOLERANCE to 25 Select the PURPLE and GREEN areas indicated.
STEP 21 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL Same settings. DESELECT With your MAGIC WAND.... Same settings. Select the GREEN areas indicated.
STEP 22 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL Same settings. DO NOT DESELECT With your MAGIC WAND.... Same settings. Select ALL the GREEN areas.
STEP 23 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical offset = 6 Horizontal offset = 0 Colour = Black Opacity = 65 Blur = 7.00 DESELECT LAYERS >>> MERGE >>> MERGE DOWN
STEP 24 ACTIVATE clown5 layer BUT leave closed. Open up the 7327.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 35% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Check "Lock aspect ratio" UNCheck "Resize all layers " ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 267 Vertical Offset = - ( minus ) 135 Edge Mode = Transparent.
STEP 25 Open up the 2630.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 40% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Check "Lock aspect ratio" UNCheck "Resize all layers " ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 213 Vertical Offset = - ( minus ) 165 Edge Mode = Transparent. SAVE YOUR WORK
STEP 26 Open up the cb39.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 35% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Check "Lock aspect ratio" UNCheck "Resize all layers " ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 138 Vertical Offset = - ( minus ) 192 Edge Mode = Transparent.
STEP 27 Open up the 7141.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 45% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Check "Lock aspect ratio" UNCheck "Resize all layers " ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 258 Vertical Offset = - ( minus ) 144 Edge Mode = Transparent.
STEP 28 CLOSE the bgd layer LAYERS >>> MERGE >>> MERGE VISIBLE Rename this layer onlookers Keep this layer active OPEN the bgd layer Open up the pogo frame image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Rename this layer frame SAVE YOUR WORK
STEP 29 ACTIVATE the bgd layer LAYERS >> NEW RASTER LAYER Select your TEXT TOOL with font and settings of your choice add your name LAYERS >>> MERGE >>> MERGE DOWN
STEP 30 Set up LAYER PALETTE as shown. Right click on Title Bar and select Copy merged from the options.
STEP 31 In ANIMATION SHOP Right click the workspace and select 'Paste As New Animation' from the options. Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 32 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 33 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 34 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu Back to PSP. Set up LAYER PALETTE as shown Right click on Title Bar and select Copy merged from the options.
STEP 35 In ANIMATION SHOP Select >>> 'Paste After Current' icon on top menu EDIT >> Select All Edit >> Copy Click inside frame 5 (F:5) to activate. Edit >> Paste After Current Frame Animation >> Reverse frames Right Click inside frame 6 (F:6) Select CUT from the options. ,
STEP 36 View >> Animation and while it is still running, File >> Save As Locate the folder in which you wish to save it. Name your animation. With the Gif Optimiser keep pressing NEXT until you get to the last one... click FINISH Close the Animation Close the frames. Close Animation Shop ,

Page designed by



for