.
|
STEP 1
Open a new image 700 x 600
Transparent background
PSPX - X2: Colour Depth = 8bits/channel
PSPX3-X9: Colour Depth RGB = 8bits/channel
Flood fill with BLUE #006ce8
VIEW >>> RULERS
|
STEP 2
Open up the clouds_21 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 0
Vertical Offset = 137
Edge Mode = Transparent
In your LAYER PALETTE change the
BLEND MODE to LUMINANCE (L)
LAYERS >>> MERGE >>> MERGE DOWN .
|
|
STEP 3
Open up the Blue_Sea image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 0
Vertical Offset = Vertical Offset = - ( minus ) 126
Edge Mode = Transparent
In your LAYER PALETTE change the
BLEND MODE to LUMINANCE (L)
.
,
|
STEP 4
Select your RASTER DEFORM tool
Mode = SCALE
use default settings
PSPX-X9:Select your PICK tool
Drag the centre BOTTOM node down to the 600 pixel mark
on your left ruler
, |
|
STEP 5
Click the RESET RECTANGLE arrow
Select your MOVER tool to disengage
the Deformation / Pick tool
Rename this layer sea 1
, |
STEP 6
LAYERS >>> DUPLICATE
EFFECTS >>> PLUGINS >>> EYE CANDY 3.1 >>> Jiggle
Enter these settings
Rename this layer sea 2 |
|
STEP 7
LAYERS >>> DUPLICATE
EFFECTS >>> PLUGINS >>> EYE CANDY 3.1 >>> Jiggle
Same settings
Rename this layer sea 3
LAYERS >>> DUPLICATE
EFFECTS >>> PLUGINS >>> EYE CANDY 3.1 >>> Jiggle
Same settings
Rename this layer sea 4
SAVE YOUR WORK, |
STEP 8
ACTIVATE sea 1
Open up the flying_birds_01_by_jumpfer image
in your PSP workspace
Choose your SELECTION TOOL
Selection Type = Rectangle
Mode = Replace
Feather = 0
Antialias = UNChecked
Select the top left bird
, |
|
STEP 9
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 225
Vertical Offset = 240
Edge Mode = Transparent
Rename this layer bird 1 |
|
STEP 10
ACTIVATE the sea 2 layer
Back to the flying_birds_01_by_jumpfer image
in your PSP workspace
Choose your SELECTION TOOL... same settings
Select the top right bird
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Same settings
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 43
Vertical Offset = 170
Edge Mode = Transparent
Rename this layer bird 2 |
|
STEP 11
Minimize the flying_birds_01_by_jumpfer image
SAVE YOUR WORK
ACTIVATE sea 4 layer
Open up the flowing shape1 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
PSP9:IMAGE >>> ROTATE >>> FREE ROTATE = LEFT 90
Ensure "All layers" is UNCHECKED
PSPX - PSPX9: IMAGE >>> FREE ROTATE = LEFT 90
Ensure "All layers" is UNCHECKED
ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE
PSPX - X9: IMAGE >>> NEGATIVE IMAGE
|
|
STEP 12
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 220
Vertical Offset = 0
Edge Mode = Transparent
Select your RASTER DEFORM tool
Mode = SCALE
use default settings
PSPX-X9:Select your PICK tool
Drag the centre BOTTOM node down to the 560 pixel mark
on your left ruler
Push the centre TOP node up to the 0 pixel mark
on your left ruler
Push the centre LEFT node right to the 485 pixel mark
on your top ruler , |
|
STEP 13
Click the RESET RECTANGLE arrow
Select your MOVER tool to disengage
the Deformation / Pick tool
LAYERS >>> DUPLICATE
IMAGE >>> MIRROR
LAYERS >>> MERGE >>> MERGE DOWN
Rename this layer swirl
SAVE YOUR WORK
|
|
STEP 14
Open up the megalodon_shark_jaws image
in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options
IMAGE >>> RESIZE = 85%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 0
Vertical Offset = 35
Edge Mode = Transparent
In your LAYER PALETTE change the BLEND MODE to MULTIPLY
Rename this layer jaws 1
LAYERS >>> DUPLICATE
In your LAYER PALETTE change the BLEND MODE to LUMINANCE (L)
Rename this layer jaws 2
|
STEP 15
Open up the BlueWhale image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options
IMAGE >>> RESIZE = 80%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
ADJUST >>> SHARPNESS >>> SHARPEN
PSP9:IMAGE >>> ROTATE >>> FREE ROTATE = RIGHT 45
Ensure "All layers" is UNCHECKED
PSPX - PSPX9: IMAGE >>> FREE ROTATE = RIGHT 45
Ensure "All layers" is UNCHECKED
, |
STEP 16
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 20
Vertical Offset = 70
Edge Mode = Transparent
Rename this layer whale 1,
LAYERS >>> DUPLICATE
Rename this layer whale 2
,
LAYERS >>> ARRANGE >>> SEND TO BOTTOM
LAYERS >>> ARRANGE >>> MOVE UP
In your LAYER PALETTE change the OPACITY to 70%
|
STEP 17
ACTIVATE the whale 1 layer
Choose your SELECTION TOOL then click on the
CUSTOM SELECTION symbol
and enter these coordinates. |
|
STEP 18
EDIT >>> CLEAR
DESELECT
SAVE YOUR WORK |
STEP 19
Maximize the flying_birds_01_by_jumpfer image
Choose your SELECTION TOOL... Same settings
Select the lower left bird
IMAGE >>> RESIZE = 65%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 80
Vertical Offset = 115
Edge Mode = Transparent
Rename this layer bird 3
|
|
STEP 20
Maximize the flying_birds_01_by_jumpfer image
Choose your SELECTION TOOL... Same settings
Select the lower right bird
IMAGE >>> RESIZE = 65%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 235
Vertical Offset = 50
Edge Mode = Transparent
Rename this layer bird 4
SAVE YOUR WORK |
|
STEP 21
Open up the corals image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE =40%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 190
Vertical Offset = - ( minus ) 150
Edge Mode = Transparent |
|
STEP 22
Open up the anchor image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 20
Vertical Offset = - ( minus ) 180
Edge Mode = Transparent
LAYERS >>> MERGE >>> MERGE DOWN |
|
STEP 23
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical & Horizontal offsets = - ( minus ) 6
Colour = Black
Opacity = 75
Blur = 10.00
, |
STEP 24
Open up the CoralReef5 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> MIRROR
IMAGE >>> RESIZE =45%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Check "Lock aspect ratio"
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 185
Vertical Offset = - ( minus ) 175
Edge Mode = Transparent
,EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
LAYERS >>> MERGE >>> MERGE DOWN
Rename this layer coral
SAVE YOUR WORK
|
|
STEP 25
ACTIVATE Raster 1
LAYERS >> NEW RASTER LAYER
Select your TEXT TOOL
with font and settings of your choice
add your name
( I suggest you put your name in the sky area )
LAYERS >>> MERGE >>> MERGE DOWN |
|
STEP 26
Set up LAYER PALETTE as shown
Right click on Title Bar and select
Copy merged from the options
, |
|
STEP 27
In ANIMATION SHOP
Right click the workspace and select
'Paste As New Animation' from the options.
Back to PSP.
Set up LAYER PALETTE as shown , |
|
STEP 28
In ANIMATION SHOP
Select >>>
'Paste After Current' icon on top menu
Back to PSP.
Set up LAYER PALETTE as shown ,
|
|
STEP 29
In ANIMATION SHOP
Select >>> 'Paste After Current' icon on top menu
Back to PSP.
Set up LAYER PALETTE as shown , |
|
STEP 30
In ANIMATION SHOP
Select >>> 'Paste After Current' icon on top menu
Back to PSP.
Set up LAYER PALETTE as shown , |
|
STEP 31
In ANIMATION SHOP
Select >>> 'Paste After Current' icon on top menu
Edit >> Select All
Right click on Title Bar of frames
Select 'Frame Properties' from the options
Display time = 25
EDIT >>> SELECT NONE
Right click inside frame 5 (F:5) and select 'Frame Properties' from the options
CHANGE
Display time = 15
, |
STEP 32
View >> Animation
and while it is still running,
File >> Save As
Locate the folder in which you wish to save it.
Name your animation.
With the Gif Optimiser keep pressing NEXT
until you get to the last one... click FINISH
Close the Animation
Close the frames.
Close Animation Shop
, |
|
|
|
|
|
|
RESIZING ANIMATIONS
Click on the Title Bar of the frames
Animation >> Resize animation
Select width and height in pixels
Click OK
Save your animation |
|
|