STEP 1
In your MATERIALS PALETTE
Load PURPLE " #6668c8 " in your foreground
Load LILAC " #d4d3fd " in your background
Then click on the GRADIENT option in your foreground palette
Select the "Foreground-background" option
using these settings. .
.
|
|
STEP 2
Open a new image 700 x 600
Transparent background
PSP9: Colour Depth = 16 Million Colors (24bit)
PSPX-X9: Colour Depth RGB = 8bits/channel
Flood fill with LILAC #d4d3fd
VIEW >>> RULERS
.
|
STEP 3
EFFECTS >>> PLUGINS >>> AP 01 LINES >>> SILVER LINING >>> Barred
.
|
STEP 4
EFFECTS>>> GEOMETRIC EFFECTS >>>
Perspective >>> Vertical
|
|
STEP 5
Select your RASTER DEFORM tool
Mode = SCALE
use default settings
PSPX-X9:Select your PICK tool
Pull the centre top node down to the 390 pixel mark
on your left ruler
Push the centre lower node up to the 570 pixel mark
on your left ruler
|
|
STEP 6
Push the centre left node right to the 25 pixel mark
on your top ruler
Pull the centre right node left to the 675 pixel mark
on your top ruler
Click the RESET RECTANGLE arrow
Select the MOVER tool to disengage the
DEFORMATION tool (PICK tool)
|
|
STEP 7
With your MAGIC WAND
Mode = Replace
Match Mode = RGB Value
Tolerance = 0
Feather = 0
Antialias = UNchecked
Sample Merged = UNCHECKED
PSP9 - X9: Check CONTIGUOUS
PSPX - X9: There is no " Sample Merged"
PSPX - X9: Use all layers = UNChecked
Select the OUTER transparent area
LAYERS >>> NEW RASTER LAYER
Flood fill with the GRADIENT
|
|
STEP 8
DESELECT
EFFECTS >>> DISTORTION EFFECTS >>> TWIRL
Degrees = 350
|
|
STEP 9
Choose your SELECTION TOOL then click on the
CUSTOM SELECTION symbol
and enter these coordinates.
|
|
STEP 10
EFFECTS >>> REFLECTION EFFECTS >>>
ROTATING MIRROR
Horizontal Offset = 0
Vertical Offset = n/a
Rotation Angle = 0
Edge Mode = Reflect
DESELECT
(Ignore the hole in the centre, it will be covered later)
SAVE YOUR WORK
|
|
STEP 11
LAYERS >>> DUPLICATE
IMAGE >>> RESIZE = 85%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Change the OPACITY to 58%
Choose your FREEHAND SELECTION TOOL
Selection Type = Point to Point
Mode = Replace
Feather = 0
Smoothing = 5
Antialias = Checked
Select the area shown
EDIT >>> CLEAR
DESELECT
Change the OPACITY to 100%
,
|
STEP 12
ACTIVATE Raster 2
EFFECTS >>> PLUGINS >>> Filter Factory Gallery Q >>> Mosaic
|
STEP 13
ACTIVATE Copy of Raster 2
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical offset = - ( minus ) 3
Horizontal offset = 10
Colour = Black
Opacity = 45
Blur = 10.00
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical offset = 3
Horizontal offset = - ( minus ) 10
Colour = Black
Opacity = 45
Blur = 10.00 |
|
STEP 14
ACTIVATE Raster 1
LAYERS >>> ARRANGE >>> MOVE UP
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical offset = 7
Horizontal offset = 0
Colour = Black
Opacity = 45
Blur = 10.00
ACTIVATE Copy of Raster 2
Repeat Drop Shadow
SAVE YOUR WORK |
|
STEP 15
ACTIVATE Raster 2
SELECTIONS >>> SELECT ALL
SELECTIONS >>> MODIFY >>> CONTRACT = 10
SELECTIONS >>> INVERT
Right click on the Title Bar and select COPY from the options
DESELECT
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
.
|
STEP 16
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical offset = 7
Horizontal offset = 7
Colour = Black
Opacity = 45
Blur = 10.00
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical offset = - ( minus ) 3
Horizontal offset = - ( minus ) 7
Colour = Black
Opacity = 70
Blur = 0
EFFECTS >>> EDGE EFFECTS >>> ENHANCE MORE
SAVE YOUR WORK
|
|
STEP 17
ACTIVATE Raster 2
ADJUST >>> BRIGHTNESS and CONTRAST >>> BRIGHTNESS/CONTRAST
Brightness = - ( minus ) 35
Contrast = 15
PSPX6-X9: Linear Mode checked |
|
STEP 18
Open up the déco 1.png image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
In your LAYER PALETTE change the
BLEND MODE to OVERLAY |
|
STEP 19
Open up the deco-3b.png image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
ADJUST >>> SHARPNESS >>> SHARPEN |
|
STEP 20
ACTIVATE the top layer
Open up the Virág-dekor.png image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 0
Vertical Offset = 40
Edge Mode = Transparent
In your LAYER PALETTE change the
BLEND MODE to LUMINANCE (L), |
|
STEP 21
LAYERS >>> MERGE >>> MERGE VISIBLE
SAVE YOUR WORK
, |
STEP 22
Open up the 6fa56b_XL.png image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = - ( minus ) 160
Vertical Offset = - ( minus ) 85
Edge Mode = Transparent |
|
STEP 23
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW |
|
STEP 24
Select your RASTER DEFORM tool
Mode = SHEAR (Shift)
use default settings
PSPX-X9:Select your PICK tool
Move the top left node
to the right level with the
150 pixel mark on your top ruler
Move the top right node to the right level with the
450 pixel mark on your top ruler
CHANGE Mode to SCALE
Move the top centre node down level with the
250 pixel mark on your left ruler |
|
STEP 25
Click the RESET RECTANGLE arrow
Select the MOVER tool to disengage the
DEFORMATION tool (PICK tool)
SAVE YOUR WORK
~~~~~~~~~~~~~~
Open up the 12_tubes_animaux_animabelle image
in your PSP workspace
Choose your SELECTION TOOL
Selection Type = Rectangle
Mode = Replace
Feather = 0
Antialias = UNChecked
Select the cat
, |
STEP 26
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 30%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 180
Vertical Offset = - ( minus ) 145
Edge Mode = Transparent |
|
STEP 27
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
Select your RASTER DEFORM tool
Mode = SHEAR (Shift)
use default settings
PSPX-X9:Select your PICK tool
Move the top left node to the right level with the
540 pixel mark on your top ruler
CHANGE Mode to SCALE
Move the top centre node down level with the
400 pixel mark on your left ruler |
|
STEP 28
Click the RESET RECTANGLE arrow
Select the MOVER tool to disengage the
DEFORMATION tool (PICK tool)
SAVE YOUR WORK
|
STEP 29
Open up the PERSIAN CAT MISTED BY BJP image
in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
LAYERS >>> ARRANGE >>> BRING TO TOP
IMAGE >>> RESIZE = 20%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
IMAGE >>>
MIRROR
EFFECTS >>> IMAGE EFFECTS >>> OFFSET
Horizontal Offset = 120
Vertical Offset = - ( minus ) 200
Edge Mode = Transparent |
|
STEP 30
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Same settings
LAYERS >>> MERGE >>> MERGE VISIBLE
SAVE YOUR WORK
|
STEP 31
LAYERS >>> NEW RASTER LAYER
SELECT your TEXT tool
With a font of your choice add your name
, |
STEP 32
LAYERS >>> MERGE >>> MERGE ALL (Flatten)
Save as .jpg image
, |
| |
|
| |
|
| |
|
