KATSUMI
PSP9 to PSPX9

This tutorial was written by Jemima ~ MARCH 2017
Copyright © 2017 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

IMG_64742.png
pays-109-Azalee.png
L33AF612032017.png
BambooWallSticker.png
metal-background-bf-red.jpg
Save to a folder on your computer

********************************

Plugins

TOADIES
MIRROR RAVE

** PLUGINS_LINKS **
HERE

********************************

You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open up the metal-background-bf-red image in your PSP workspace WINDOW >>> DUPLICATE Close the original Image LAYERS >>> Promote background layer LAYERS >>> DUPLICATE EDIT >>> Repeat Duplicate layer CLOSE Copy of Raster 1 and Raster 1 .
STEP 2 Working on Copy (2) of Raster 1 IMAGE >>> RESIZE = 85% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X9: Check CONTIGUOUS PSPX - X9: There is no " Sample Merged" PSPX - X9: Use all layers = UNChecked Select the OUTER transparent area
STEP 3 Flood fill with WHITE SELECTIONS >>> INVERT SELECTIONS >>> MODIFY >>> EXPAND = 3 SELECTIONS >>> INVERT EDIT >>> CLEAR DESELECT.
STEP 4 SELECTIONS >>> SELECT ALL SELECTIONS >>> FLOAT SELECTIONS >>> DEFLOAT SELECTIONS >>> MODIFY >>> CONTRACT = 3 LAYERS >>> NEW RASTER LAYER Open up the IMG_64742 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DO NOT DESELECT
STEP 5 EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 20 Rotation Angle = 45 Vertical Offset = - ( minus ) 48 Edge Mode = Reflect In your LAYER PALETTE change the BLEND MODE to SCREEN DESELECT
STEP 6 LAYERS >>> DUPLICATE IMAGE >>> MIRROR LAYERS >>> MERGE >>> MERGE DOWN SAVE YOUR WORK
STEP 7 CLOSE Copy (2) of Raster 1 and Raster 2 OPEN & ACTIVATE Copy of Raster 1 EFFECTS >>> PLUGINS >>> TOADIES >>> Weaver ,
STEP 8 EFFECTS >>> PLUGINS >>> Mirror Rave >>> Quadrant Flip ,
STEP 9 EFFECTS >>> EDGE EFFECTS >>> ENHANCE MORE IMAGE >>> RESIZE = 95% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE With your MAGIC WAND.... Same settings. Select the OUTER transparent area Flood fill with WHITE SELECTIONS >>> INVERT SELECTIONS >>> MODIFY >>> EXPAND = 3 SELECTIONS >>> INVERT EDIT >>> CLEAR DESELECT. SAVE YOUR WORK
STEP 10 In your LAYER PALETTE change the BLEND MODE to DIFFERENCE OPEN ALL LAYERS ACTIVATE Raster 2
STEP 11 Open up the pays-109-Azalee image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE =75% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the tuber image
STEP 12 EDIT >>> CLEAR DESELECT Select your RASTER DEFORM tool Mode = SCALE use default settings PSPX-X9:Select your PICK tool Pull the centre left and right nodes in to the edge of your image as shown. Pull the centre lower node down to the edge of your image as shown. Push the centre upper node up to the edge of your image as shown.
STEP 13 Click the RESET RECTANGLE arrow Select the MOVER tool to disengage the DEFORMATION tool (PICK tool)
STEP 14 Open up the BambooWallSticker image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> MIRROR IMAGE >>> RESIZE = 75% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ,
STEP 15 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 175 Vertical Offset = - ( minus ) 60 Edge Mode = Transparent EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = - ( minus ) 1 Colour = WHITE Opacity = 100 Blur = 0 ADJUST >>> SHARPNESS >>> SHARPEN
STEP 16 Open up the L33AF612032017 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 60% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN ,
STEP 17 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 175 Vertical Offset = - ( minus ) 28 Edge Mode = Transparent Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the tuber image
STEP 18 EDIT >>> CLEAR DESELECT EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical offset = - ( minus ) 8 Horizontal offset = 6 Colour = Black Opacity = 75 Blur = 12.00
STEP 19 LAYERS >>> MERGE >>> MERGE VISIBLE LAYERS >>> NEW RASTER LAYER Flood fill with BLACK SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT LAYERS >>> MERGE >>> MERGE VISIBLE
STEP 20 LAYERS >>> NEW RASTER LAYER Select your TEXT tool Using a font of your choice Add your name
STEP 21 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for