ADVENTURE AWAITS
PSP9 to PSPX9

This tutorial was written by Jemima ~ JANUARY 2017
Copyright © 2017 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

AS-Deco.png
purple-abstract.png
Image3BC.pspimage
jungle-out-there.png
adventure awaits.png
SvB (964) Beauty.png
12926130895_animaux_nikita.png
MKM 2015 JULY SERIES SCENIC_T2.pspimage
Save to a folder on your computer

********************************

Plugins

** EYE CANDY3 **
OR
** EYE CANDY 4000 **
http://pspgroep.seniorennet.be/filterpagina.htm

********************************

You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open up the purple-abstract image in your PSP workspace WINDOW >>> DUPLICATE Close the original Image. IMAGE >>> RESIZE = 80% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 70 Vertical Offset = 0 Edge Mode = Transparent
STEP 2 EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 15 Vertical Offset = n/a Rotation Angle = 180 Edge Mode = Reflect EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 50 Vertical Offset = - ( minus ) 80 Edge Mode = Transparent Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 3 EDIT >>> CLEAR DESELECT LAYERS >>> DUPLICATE IMAGE >>> FLIP LAYERS >>> MERGE >>> MERGE DOWN
STEP 4 EFFECTS >>> DISTORTION EFFECTS >>> PUNCH Strength = 60% PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX9: IMAGE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED IMAGE >>> RESIZE = 80% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE EFFECTS >>> DISTORTION EFFECTS >>> PUNCH Strength = 60%
STEP 5 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. DELETE Raster 1 With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X9: Check CONTIGUOUS PSPX - X9: There is no " Sample Merged" PSPX - X9: Use all layers = UNChecked Select the OUTER transparent area
STEP 6 LAYERS >>> NEW RASTER LAYER LAYERS >>> ARRANGE >>> MOVE DOWN SELECTIONS >>> MODIFY >>> EXPAND = 2 Flood fill with PURPLE #3f239c
STEP 7 SELECTIONS >>> INVERT LAYERS >>> NEW RASTER LAYER Open up the MKM 2015 JULY SERIES SCENIC_T2 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DESELECT SAVE YOUR WORK
STEP 8 Open up the 12926130895_animaux_nikita image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 55% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN ,
STEP 9 Using your SELECTION TOOL... Select and delete tuber text. Reposition with your MOVER TOOL
STEP 10 ACTIVATE Raster 2 With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 10 Feather = 3 Antialias = Checked Sample Merged = UNCHECKED PSP9 - X9: Check CONTIGUOUS PSPX - X9: There is no " Sample Merged" PSPX - X9: Use all layers = UNChecked PSP9 - X9 ANTIALIAS = Inside Select the centre of your image
STEP 11 SELECTIONS >>> MODIFY >>> EXPAND = 3 Flood fill with LIGHT PURPLE #875bd6 SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR
STEP 12 SELECTIONS >>> INVERT EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW ~~~~~~~~~~~~~~~~~~~ OR EFFECTS >>> PLUGINS >>> EYE CANDY 4000 >>> SHADOWLAB Center Offset Direction = 315 Center Offset Distance = 10.00 Overall Opacity = 65 Overall Blur (Pixels) = 10.00 Perspectivel Blur (Pixels) = 0.00 Color = BLACK Check 'Draw Only Outside Selection'
STEP 13 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW Same settings BUT... change DIRECTION to 135 DESELECT ~~~~~~~~~~~~~~~~~~~ OR EFFECTS >>> PLUGINS >>> EYE CANDY 4000 >>> SHADOWLAB Same settings BUT... change DIRECTION to 135 DESELECT SAVE YOUR WORK
STEP 14 CLOSE Raster 1 LAYERS >>> MERGE >>> MERGE VISIBLE CLOSE the Merged layer OPEN & ACTIVATE Raster 1 IMAGE >>> RESIZE
STEP 15 Open up the AS-Deco.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 305 Vertical Offset = 0 Edge Mode = Transparent LAYERS >>> DUPLICATE IMAGE >>> MIRROR LAYERS >>> MERGE >>> MERGE DOWN OPEN & ACTIVATE the Merged layer
STEP 16 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW... Same settings EDIT >>> Repeat Drop Shadow.. change DIRECTION to 315 ~~~~~~~~~~~~~~~~~~~ OR EFFECTS >>> PLUGINS >>> EYE CANDY 4000 >>> SHADOWLAB... Same settings EDIT >>> Repeat Shadowlab.. change DIRECTION to 315
STEP 17 ACTIVATE Raster 1 Open up the Image3BC image in your PSP workspace With Layer 3 active Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = - ( minus ) 115 Edge Mode = Transparent LAYERS >>> DUPLICATE IMAGE >>> FLIP LAYERS >>> MERGE >>> MERGE DOWN
STEP 18 Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 19 EDIT >>> CLEAR DESELECT LAYERS >>> DUPLICATE LAYERS >>> ARRANGE >>> SEND TO BOTTOM and CLOSE this layer ACTIVATE Raster 1 LAYERS >>> MERGE >>> MERGE VISIBLE IMAGE >>> RESIZE = 80% "Lock aspect ratio" = CHECKED Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN
STEP 20 LAYERS >>> NEW RASTER LAYER Flood fill with PURPLE #3f239c LAYERS >>> ARRANGE >>> SEND TO BOTTOM OPEN & ACTIVATE Copy of Raster 3 PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX9: IMAGE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED SAVE YOUR WORK
STEP 21 ACTIVATE the Merged layer LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 2 Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR SELECTIONS >>> MODIFY >>> CONTRACT = 5 Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR SELECTIONS >>> MODIFY >>> CONTRACT = 5 Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR
STEP 22 SELECTIONS >>> MODIFY >>> CONTRACT = 5 Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical offset = 2 Horizontal offset = 1 Colour = Black Opacity = 100 Blur = 0
STEP 23 LAYERS >>> NEW RASTER LAYER Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 24 Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR SELECTIONS >>> MODIFY >>> CONTRACT = 4 Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR SELECTIONS >>> MODIFY >>> CONTRACT = 4 Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 2 EDIT >>> CLEAR DESELECT EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical offset = 2 Horizontal offset = 1 Colour = Black Opacity = 100 Blur = 0 SAVE YOUR WORK
STEP 25 Open up the SvB (964) Beauty image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 70% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN Reposition with your MOVER tool
STEP 26 Remove the tuber text with your SELECTION TOOL ACTIVATE Raster 2 LAYERS >>> ARRANGE >>> BRING TO TOP
STEP 27 Open up the adventure awaits image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - X9: IMAGE >>> NEGATIVE IMAGE IMAGE >>> RESIZE = 25% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE LAYERS >>> DUPLICATE LAYERS >>> MERGE >>> MERGE DOWN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 195 Vertical Offset = 160 Edge Mode = Transparent
STEP 28 Open up the jungle-out-there image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - X9: IMAGE >>> NEGATIVE IMAGE IMAGE >>> RESIZE = 35% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Reposition with your MOVER tool EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Same settings
STEP 29 LAYERS >>> MERGE >>> MERGE VISIBLE LAYERS >>> NEW RASTER LAYER SELECT your TEXT tool With a font of your choice add your name ,
STEP 30 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for