ORCHID BLUSH FRAME
PSP9 to PSPX9

This tutorial was written by Jemima ~ JANUARY 2017
Copyright © 2017 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

OB-Oval.png
leaves43.png
clipart0231.png
BlondeBeauty.png
JF_Borders.pspimage
Black-dot-texture.png
Save to a folder on your computer

********************************


Plugins

** MURA'S FILTER MEISTER **
MuRa's Filter Meister - 2
http://pspgroep.seniorennet.be/filterpagina.htm

** SIMPLE FILTERS **
http://pspgroep.seniorennet.be/filterpagina.htm

********************************

You can drag this hand down the page with you to keep your place in the tut.

STEP 1 In your MATERIALS PALETTE Load ORANGE " #e19d0b " in your foreground Load GREEN " #96be53 " in your background Open a new image 700 x 600 Transparent background PSP9: Colour Depth = 16 Million Colors (24bit) PSPX-X9: Colour Depth RGB = 8bits/channel Flood fill with ORANGE #e19d0b .
STEP 2 In your MATERIALS PALETTE click on the GRADIENT option in your foreground palette Select the Foreground-background option. STYLE = Linear
STEP 3 LAYERS >>> NEW RASTER LAYER Flood fill with GRADIENT In your LAYER PALETTE Change the BLEND MODE to DIFFERENCE
STEP 4 CLOSE Raster 1 and Raster 2 Open up the clipart0231 image in your PSP workspace Right click on the Title Bar and select COPY from the options (Minimize for now) Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. EFFECTS >>> PLUGINS >>> MuRa's Meister >>> Copies >>> Encircle ,
STEP 5 Open up the OB-Oval image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X9: Check CONTIGUOUS PSPX - X9: There is no " Sample Merged" Select the CENTRE transparent area
STEP 6 SELECTIONS >>> MODIFY >>> EXPAND = 3 ACTIVATE Raster 3 EDIT >>> CLEAR DESELECT
STEP 7 Open up the leaves43 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 60% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN LAYERS >>> ARRANGE >>> MOVE DOWN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 265 Vertical Offset = 140 Edge Mode = Transparent
STEP 8 EFFECTS >>> PLUGINS >>> SIMPLE >>> TOP LEFT MIRROR,
STEP 9 Maximize the clipart0231 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. IMAGE >>> MIRROR IMAGE >>> RESIZE = 60% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN LAYERS >>> ARRANGE >>> MOVE DOWN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 245 Vertical Offset = 190 Edge Mode = Transparent
STEP 10 EFFECTS >>> PLUGINS >>> SIMPLE >>> TOP LEFT MIRROR SAVE YOUR WORK
STEP 11 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 3 Colour = Black Opacity = 85 Blur = 10.00 ACTIVATE Raster 5 EDIT >>> Repeat Drop Shadow ACTIVATE Raster 3 EDIT >>> Repeat Drop Shadow CLOSE Raster 4 LAYERS >>> MERGE >>> MERGE VISIBLE OPEN Raster 1 and Raster 2
STEP 12 OPEN & ACTIVATE Raster 4 SELECTIONS >>> SELECT ALL SELECTIONS >>> FLOAT SELECTIONS >>> DEFLOAT SELECTIONS >>> MODIFY >>> EXPAND = 1 Flood fill with DARK GREEN #456c0e DESELECT LAYERS >>> MERGE >>> MERGE DOWN
STEP 13 IMAGE >>> RESIZE = 90% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 3 Colour = Black Opacity = 85 Blur = 10.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 3 Click OK
STEP 14 LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL Open up the JF_Borders image in your PSP workspace Right click on the Title Bar and select COPY MERGED from the options Right click on the Title Bar of your frame image and select PASTE INTO SELECTION from the options. DESELECT ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - X9: IMAGE >>> NEGATIVE IMAGE
STEP 15 ACTIVATE Raster 2 LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL Open up the Black-dot-texture image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE INTO SELECTION from the options. DESELECT ADJUST >>> BRIGHTNESS and CONTRAST >>> BRIGHTNESS/CONTRAST Brightness = 255 Contrast = 0 PSPX6-X9: Linear mode checked
STEP 16 ACTIVATE the Merged layer With your MAGIC WAND Mode = ADD (Shift) Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X9: Check CONTIGUOUS PSPX - X9: There is no " Sample Merged" Select the centre of your image
STEP 17 SELECTIONS >>> MODIFY >>> EXPAND = 14 ACTIVATE Raster 4 EDIT >>> CLEAR DESELECT
STEP 18 CLOSE Raster 1 and Raster 2 LAYERS >>> MERGE >>> MERGE VISIBLE CLOSE the Merged layer OPEN Raster 1 OPEN & ACTIVATE Raster 2 LAYERS >>> MERGE >>> MERGE DOWN OPEN the Merged layer Save as .pspimage image
STEP 19 With Raster 1active Open up the BlondeBeauty image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 70% Check "Lock aspect ratio." Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN Reposition down slightly with your MOVER tool
STEP 20 LAYERS >>> MERGE >>> MERGE VISIBLE LAYERS >>> NEW RASTER LAYER Select your TEXT tool and with a font of your choice add your name
STEP 21 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for