DING SCROLL FRAME
PSP9 to PSPX9

This tutorial was written by Jemima ~ JANUARY 2017
Copyright © 2017 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

wave_2.png
Trio.pspimage
ding-scroll.png
butterfly7b.png
overlapping-stripes.jpg
Save to a folder on your computer

goldpattern.bmp
Save to your PSP Patterns folder
********************************


Plugins

** EYE CANDY3 **
http://pspgroep.seniorennet.be/filterpagina.htm

** GREG'S FACTORY OUTPUT Vol 2 **
http://www.fleursauvage.be/utilitaire/filtres/filtres.htm
http://www.lesdouceursdecloclo.com/mesfiltres/mes_filtres.htm

********************************

You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open a new image 700 x 600 Transparent background PSP9: Colour Depth = 16 Million Colors (24bit) PSPX-X9: Colour Depth RGB = 8bits/channel Open up the ding-scroll image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> TEXTURE EFFECTS >>> SCULPTURE COLOUR = #c0c0c0 PATTERN = goldpattern
STEP 2 With your MAGIC WAND Mode = Add (Shift) Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = Checked Sample Merged = CHECKED PSP9 - X9: Check CONTIGUOUS PSPX - X9: There is no " Sample Merged" PSPX - X9: Use all layers = UNChecked PSP9 - X9: ANTIALIAS = Outside Select the areas indicated
STEP 3 LAYERS >>> NEW RASTER LAYER LAYERS >>> ARRANGE >>> MOVE DOWN SELECTIONS >>> MODIFY >>> EXPAND = 2 Flood fill selections with OFF WHITE #f8eee4 DESELECT
STEP 4 ACTIVATE Raster 2 With your MAGIC WAND Same settings Select the areas indicated.
STEP 5 ACTIVATE Raster 3 SELECTIONS >>> MODIFY >>> EXPAND = 2 Flood fill selections with BEIGE #b4a596 DESELECT ACTIVATE Raster 2 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 3 Colour = Black Opacity = 70 Blur = 8.00 LAYERS >>> MERGE >>> MERGE DOWN ADJUST >>> SHARPNESS >>> SHARPEN SAVE YOUR WORK
STEP 6 EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 100 Vertical Offset = 5 Edge Mode = Transparent LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 50% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 250 Vertical Offset = 100 Edge Mode = Transparent
STEP 7 LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 10 Vertical Offset = - ( minus ) 175 Edge Mode = Transparent CLOSE Raster 1 LAYERS >>> MERGE >>> MERGE VISIBLE
STEP 8 CLOSE the Merged layer OPEN & ACTIVATE Raster 1 Flood fill with BLUE #052a4a LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL Open up the overlapping-stripes image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DESELECT EFFECTS >>> PLUGINS >>> GREG'S FACTORY OUTPUT VOL2 >>> POOL SHADOW ,
STEP 9 Open up the wave_2.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> TEXTURE EFFECTS >>> SCULPTURE Same settings EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = 145 Edge Mode = Transparent
STEP 10 LAYERS >>> DUPLICATE LAYERS >>> MERGE >>> MERGE DOWN LAYERS >>> DUPLICATE IMAGE >>> FLIP IMAGE >>> MIRROR LAYERS >>> MERGE >>> MERGE DOWN Edit >>> Repeat Layer Merge Down
STEP 11 OPEN & ACTIVATE the Merged layer With your MAGIC WAND.... Same settings. Change TOLERANCE to 30 Select the areas indicated Be sure to select right up to the inner edges of the frames ,
STEP 12 SELECTIONS >>> MODIFY >>> EXPAND = 4 ACTIVATE Raster 2 EDIT >>> CLEAR DESELECT SAVE YOUR WORK
STEP 13 ACTIVATE the Merged layer EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW.
STEP 14 EDIT >>> Repeat Drop Shadow.. change DIRECTION to 135 LAYERS >>> MERGE >>> MERGE DOWN
STEP 15 LAYERS >>> NEW RASTER LAYER Flood fill with BLUE SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR DESELECT EFFECTS >>> TEXTURE EFFECTS >>> SCULPTURE Same settings. ,
STEP 16 LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 97% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 97% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE LAYERS >>> MERGE >>> MERGE DOWN Edit >>> Repeat Layer Merge Down EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 70 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK
STEP 17 With your MAGIC WAND.... Same settings. Select the areas indicated
STEP 18 Flood fill with MID BLUE #05528e DESELECT EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW Same settings EDIT >>> Repeat Drop Shadow.. change DIRECTION to 315
STEP 19 Open up the butterfly7b image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> MIRROR IMAGE >>> RESIZE = 35% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 270 Vertical Offset = 210 Edge Mode = Transparent
STEP 20 LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 90% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN IMAGE >>> MIRROR EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 170 Vertical Offset = - ( minus ) 290 Edge Mode = Transparent
STEP 21 LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 90% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 215 Vertical Offset = 135 Edge Mode = Transparent
STEP 22 LAYERS >>> MERGE >>> MERGE DOWN Edit >>> Repeat Layer Merge Down EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW Same settings CLOSE Raster 1 LAYERS >>> MERGE >>> MERGE VISIBLE OPEN & ACTIVATE Raster 1 Save as .pspimage
STEP 23 Open up the Trio image in your PSP workspace Activate Raster 1 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool
STEP 24 Back to the Trio image in your PSP workspace Activate Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 65% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN Reposition with your MOVER tool
STEP 25 Back to the Trio image in your PSP workspace Activate Raster 3 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 65% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN Reposition with your MOVER tool
STEP 26 LAYERS >>> MERGE >>> MERGE VISIBLE LAYERS >>> NEW RASTER LAYER SELECT your TEXT tool With a font of your choice add your name
STEP 27 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for