MAGENTA
PSP9 to PSPX8

This tutorial was written by Jemima ~ FEBRUARY 2016
Copyright © 2016 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

élement 2.png
JF-Elements-B4.pspimage
JF-Elements-C4.pspimage
JB_bw_shoe_butterfly2.psp
SvB Decoratie 21.pspimage
jmcnally_shop_shoefits.png
Abstract_flowing-Lines by + J.Peirom.png
Save to a folder on your computer

********************************

Plugins

** GRAPHICS PLUS **
http://www.fleursauvage.be/utilitaire/filtres/filtres.htm


********************************

You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open a new image 700 x 600 Transparent background PSP9: Colour Depth = 16 Million Colors (24bit) PSPX-X8: Colour Depth RGB = 8bits/channel In your MATERIALS PALETTE Load PURPLE" #4a0e45 " in your foreground Flood fill with PURPLE LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 90% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE EFFECTS >>> PLUGINS >>> GRAPHICS PLUS >>> Panel Stripes .
STEP 2 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 3 Colour = WHITE Opacity = 100 Blur = 12.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 3 Click OK. ACTIVATE Raster 1 ADJUST >>> ADD/REMOVE NOISE >>> ADD NOISE
STEP 3 ADJUST >>> SHARPNESS >>> SHARPEN MORE ACTIVATE Copy of Raster 1 LAYERS >>> MERGE >>> MERGE DOWN
STEP 4 Open up the Abstract_flowing-Lines by + J.Peirom image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> MIRROR EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 10 Vertical Offset = 113 Edge Mode = Transparent.
STEP 5 LAYERS >>> DUPLICATE IMAGE >>> FLIP LAYERS >>> MERGE >>> MERGE DOWN LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 85% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE IMAGE >>> MIRROR LAYERS >>> MERGE >>> MERGE DOWN
STEP 6 Open up the JF-Elements-C4 image in your PSP workspace Activate Raster 5 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 90% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 115 Vertical Offset = - ( minus ) 15 Edge Mode = Transparent.
STEP 7 LAYERS >>> DUPLICATE IMAGE >>> MIRROR EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 85 Vertical Offset =0 Edge Mode = Transparent. LAYERS >>> MERGE >>> MERGE DOWN
STEP 8 LAYERS >>> DUPLICATE IMAGE >>> FLIP LAYERS >>> MERGE >>> MERGE DOWN
STEP 9 Open up the JF-Elements-B4 image in your PSP workspace Activate Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 42 Vertical Offset = - ( minus ) 30 Edge Mode = Transparent.
STEP 10 Open up the JB_bw_shoe_butterfly2 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 50% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE Sharpen if you wish Reposition with your MOVER tool
STEP 11 In your MATERIALS PALETTE Load PINK" #a22454 " in your background ,
STEP 12 Open up the élement 2.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 30 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X8: Check CONTIGUOUS PSPX - X8: There is no " Sample Merged" PSPX - X8: Use all layers = UNChecked Select the GREY section Flood fill with PINK DESELECT EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0
STEP 13 IMAGE >>> RESIZE = 93% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 328 Vertical Offset = - ( minus ) 18 Edge Mode = Transparent.
STEP 14 ACTIVATE Raster 6 PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX8: IMAGE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 67 Vertical Offset = - ( minus ) 279 Edge Mode = Transparent. ACTIVATE Copy of Raster 6 LAYERS >>> MERGE >>> MERGE DOWN
STEP 15 LAYERS >>> DUPLICATE IMAGE >>> FLIP IMAGE >>> MIRROR LAYERS >>> MERGE >>> MERGE DOWN
STEP 16 LAYERS >>> NEW RASTER LAYER Flood fill with PINK SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 5 EDIT >>> CLEAR Flood fill with WHITE SELECTIONS >>> MODIFY >>> CONTRACT = 1 EDIT >>> CLEAR DESELECT
STEP 17 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 2 Colour = WHITE Opacity = 100 Blur = 8.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 2 Click OK
STEP 18 ACTIVATE Raster 6 Open up the SvB Decoratie 21 image in your PSP workspace Activate Raster 1 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 3 Colour = WHITE Opacity = 100 Blur = 12.00 Reposition with your MOVER tool
STEP 19 Open up the jmcnally_shop_shoefits image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - X8: IMAGE >>> NEGATIVE IMAGE IMAGE >>> RESIZE = 60% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE LAYERS >>> DUPLICATE LAYERS >>> MERGE >>> MERGE DOWN ,
STEP 20 PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX8: IMAGE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = - ( minus ) 255 Vertical Offset =0 Edge Mode = Transparent.
STEP 21 LAYERS >>> MERGE >>> MERGE VISIBLE LAYERS >>> NEW RASTER LAYER SELECT your TEXT tool With a font of your choice add your name ,
STEP 22 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image ,

TESTERS RESULTS

Page designed by



for