REHEARSAL
PSP9 to PSPX6

This tutorial was written by Jemima ~ MARCH 2015
Copyright © 2015 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

swirls (1).png
JF_WSA_3.png
blue curves.png
rehearsal.pspimage
music-by-drehi-4.png
translucent-pearls.png
JF-Element221.pspimage
Save to a folder on your computer

bktexture13.gif
Save to your PSP Textures folder


********************************

Plugins

** EYE CANDY3 **
http://www.pircnet.com/downloads.html

** CYBIA-SCREENWORKS **
http://www.cybia.co.uk/theworks.html

** GREG'S FACTORY OUTPUT Vol 2 **
http://www.fleursauvage.be/utilitaire/filtres/filtres.htm



********************************
You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open a new image 700 x 600 Transparent background PSP9: Colour Depth = 16 Million Colors (24bit) PSPX-X6: Colour Depth RGB = 8bits/channel Flood fill with GREEN #333200 .
STEP 2 SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 15 SELECTIONS >>> INVERT EFFECTS >>> PLUGINS >>> Cybia Screenworks >>> Dot Screen EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK
STEP 3 EFFECTS >>> 3D EFFECTS >>> CHISEL COLOUR = #4b0d0d
STEP 4 SELECTIONS >>> INVERT SELECTIONS >>> MODIFY >>> CONTRACT = 15 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK SELECTIONS >>> INVERT EFFECTS >>> 3D EFFECTS >>> CHISEL Change "Size" to 10 . SELECTIONS >>> INVERT
STEP 5 SELECTIONS >>> MODIFY >>> CONTRACT = 40 EFFECTS >>> PLUGINS >>> Cybia Screenworks >>> Light Gauze EFFECTS >>> PLUGINS >>> GREG'S FACTORY OUTPUT VOL2 >>> POOL SHADOW ,
STEP 6 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK DESELECT
STEP 7 With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X6: Check CONTIGUOUS PSPX - X6: There is no " Sample Merged" PSPX - X6: Use all layers = UNChecked Select the border shown
STEP 8 LAYERS >>> NEW RASTER LAYER Flood fill with #ab5500 EFFECTS >>> PLUGINS >>> Cybia Screenworks >>> Light Gauze EFFECTS >>> PLUGINS >>> GREG'S FACTORY OUTPUT VOL2 >>> POOL SHADOW Same settings IMAGE >>> MIRROR ADJUST >>> BRIGHTNESS and CONTRAST >>> BRIGHTNESS/CONTRAST Brightness = 25 Contrast = 25 PSPX6: Linear Mode checked DESELECT
STEP 9 Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates. LAYERS >>> NEW RASTER LAYER
STEP 10 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK LAYERS >>> NEW RASTER LAYER
STEP 11 Open up the blue curves image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DESELECT IMAGE >>> MIRROR EFFECTS >>> REFLECTION EFFECTS >>> ROTATING MIRROR Horizontal Offset = 0 Vertical Offset = 180 Rotation Angle = n/a Edge Mode = Reflect Select your RASTER DEFORM tool Mode = SCALE use default settings PSPX-X6:Select your PICK tool
STEP 12 Drag the centre top node up to the top edge of your image
STEP 13 Click the RESET RECTANGLE arrow Select the MOVER tool to disengage the DEFORMATION tool (PICK tool) EFFECTS >>> TEXTURE EFFECTS >>> TEXTURE TEXTURE = bktexture13
STEP 14 EFFECTS >>> EDGE EFFECTS >>> ENHANCE MORE In your LAYER PALETTE change the BLEND MODE to LUMINANCE
STEP 15 LAYERS >>> NEW RASTER LAYER Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol Same settings Open up the translucent-pearls image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. DO NOT DESELECT
STEP 16 LAYERS >>> NEW RASTER LAYER Open up the JF-Element221 image in your PSP workspace Raster 1 active Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE INTO SELECTION from the options. In your LAYER PALETTE change the OPACITY to 55% DESELECT ,
STEP 17 Open up the JF_WSA_3 image in your PSP workspace Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the element shown
STEP 18 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - X6: IMAGE >>> NEGATIVE IMAGE EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Reposition with your MOVER tool
STEP 19 LAYERS >>> DUPLICATE IMAGE >>> MIRROR LAYERS >>> MERGE >>> MERGE DOWN In your LAYER PALETTE change the OPACITY to 65%
STEP 20 Open up the swirls (1) image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE =15% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE LAYERS >>> DUPLICATE LAYERS >>> MERGE >>> MERGE DOWN LAYERS >>> DUPLICATE LAYERS >>> MERGE >>> MERGE DOWN
STEP 21 ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - X6: IMAGE >>> NEGATIVE IMAGE EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0
STEP 22 Open up the music-by-drehi-4 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE =35% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE LAYERS >>> DUPLICATE LAYERS >>> MERGE >>> MERGE DOWN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = - (minus) 150 Edge Mode = Transparent
STEP 23 ADJUST >>> COLOUR BALANCE >>> NEGATIVE IMAGE PSPX - X6: IMAGE >>> NEGATIVE IMAGE EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0,
STEP 24 LAYERS >>> MERGE >>> MERGE VISIBLE Open up the rehearsal image in your PSP workspace Activate the father layer Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool
STEP 25 Back to the rehearsal image in your PSP workspace Activate the mother layer Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> MIRROR Reposition with your MOVER tool
STEP 26 Back to the rehearsal image in your PSP workspace Activate the child layer Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> MIRROR Reposition with your MOVER tool
STEP 27 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
STEP 28 Activate Raster 2 EDIT >>> Repeat Drop Shadow. Activate Raster 1 EDIT >>> Repeat Drop Shadow.
STEP 29 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> PERSPECTIVE SHADOW
STEP 30 Activate Raster 2 EDIT >>> Repeat Perspective Shadow. Activate Raster 3 EDIT >>> Repeat Perspective Shadow.
STEP 31 LAYERS >>> NEW RASTER LAYER Select your TEXT tool Using a font of your choice Add your name
STEP 32 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image

TESTERS RESULTS

Page designed by



for