SPREAD THE WORD
PSP9 to PSPX6

This tutorial was written by Jemima ~ MAY 2014
Copyright © 2013/14 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

********************************

ANIMATION SHOP 3.11
Download HERE

********************************

Materials

frames.png
tenniscourt.png
tennis-balls.png
black-lab.pspimage
tennis_rockwell.png
WA-SpreadTheWORD.pspimage
Save to a folder on your computer

t6b.jpg
Save to your PSP Patterns folder


Plugins

** NONE**

********************************
You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open a new image 700 x 600 Transparent background PSPX - X2: Colour Depth = 8bits/channel PSPX3-X6: Colour Depth RGB = 8bits/channel Flood fill with WHITE
STEP 2 Open up the frames.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = 186 Edge Mode = Transparent With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X6: Check CONTIGUOUS PSPX - X6: There is no " Sample Merged" PSPX - X6: Use all layers = UNChecked Select the area outside the frames
STEP 3 In your MATERIALS PALETTE load t6b PATTERN in the foreground using these settings.
STEP 4 ACTIVATE Raster 1 Flood fill with the PATTERN ADJUST >>> HUE & SATURATION >>> COLORIZE ACTIVATE Raster 2 SELECTIONS >>> INVERT EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 50 Blur = 8.00 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 5 Click OK DO NOT DESELECT
STEP 5 ACTIVATE Raster 1 EDIT >>> CLEAR DESELECT Open up the tenniscourt.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = 186 Edge Mode = Transparent LAYERS >>> ARRANGE >>> MOVE DOWN
STEP 6 ACTIVATE Raster 2 LAYERS >>> MERGE >>> MERGE DOWN Open up the tennis_rockwell.png image in your PSP workspace Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = UNChecked Select the top LEFT image excluding the feathered section at the bottom.
STEP 7 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool Rename this layer Couple 1
STEP 8 Choose your SELECTION TOOL same settings Back to the tennis_rockwell.png image Select the top centre image, again excluding the feathered section at the bottom.
STEP 9 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool Rename this layer Couple 2
STEP 10 Choose your SELECTION TOOL same settings Back to the tennis_rockwell.png image Select the top right image, again excluding the feathered section at the bottom.
STEP 11 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool Rename this layer Couple 3
STEP 12 CLOSE couple 1 to couple 3 layers Choose your SELECTION TOOL same settings Back to the tennis_rockwell.png image Select the centre row, left image, again excluding the feathered section at the bottom.
STEP 13 Right click on the Title Bar and select COPY from the options Still on couple 3 layer Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool Rename this layer Couple 4
STEP 14 Continue in this manner until all 3 couples from the centre row are placed on your tag... Rename layers Couple 5 and Couple 6
STEP 15 CLOSE couple 4 to couple 6 layers Choose your SELECTION TOOL same settings Back to the tennis_rockwell.png image Select the bottom row, left image, again excluding the feathered section at the bottom.
STEP 16 Right click on the Title Bar and select COPY from the options Still on couple 6 layer Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool Rename this layer Couple 7
STEP 17 Continue in this manner until all 3 couples from the bottom row are placed on your tag... Rename layers Couple 8 and Couple 9 SAVE YOUR WORK
STEP 18 ACTIVATE Raster 1 SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 10 SELECTIONS >>> INVERT EFFECTS >>> 3D EFFECTS >>> INNER BEVEL DO NOT DESELECT
STEP 19 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = - ( minus ) 5 Colour = Black Opacity = 50 Blur = 8.00 DESELECT LAYERS >>> MERGE >>> MERGE DOWN Rename this layer bgd
STEP 20 Open up the tennis-balls.png image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = - (Minus) 100 Edge Mode = Transparent EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 50 Blur = 8.00 LAYERS >>> MERGE >>> MERGE DOWN
STEP 21 LAYERS >>> NEW RASTER LAYER Choose your SELECTION TOOL then click on the CUSTOM SELECTION symbol and enter these coordinates.
STEP 22 Flood fill with BLACK DESELECT EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 50 Blur = 8.00 LAYERS >>> MERGE >>> MERGE DOWN SAVE YOUR WORK
STEP 23 Open up the black-lab image in your PSP workspace Activate Raster 1 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 75% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = - (Minus) 104 Edge Mode = Transparent Rename this layer dog 1
STEP 24 Back to the black-lab image in your PSP workspace Activate Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 75% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = - (Minus) 104 Edge Mode = Transparent Rename this layer dog 2
STEP 25 Back to the black-lab image in your PSP workspace Activate Raster 3 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 75% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal Offset = 0 Vertical Offset = - (Minus) 104 Edge Mode = Transparent Rename this layer dog 3
STEP 26 Open up the WA-SpreadTheWORD image in your PSP workspace Activate Raster 1 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 50 Blur = 8.00 Reposition with your MOVER tool Rename this layer WA 1
STEP 27 Back to the WA-SpreadTheWORD image in your PSP workspace Activate Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your tag image and select PASTE AS NEW LAYER from the options. EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 5 Colour = Black Opacity = 50 Blur = 8.00 Reposition with your MOVER tool Rename this layer WA 2
STEP 28 ACTIVATE the bgd layer LAYERS >> NEW RASTER LAYER Select your TEXT TOOL with font and settings of your choice add your name LAYERS >>> MERGE >>> MERGE DOWN SAVE YOUR WORK
To Animate - Page 2 .

Page designed by



for