SASSY FRAME
PSP9 to PSPX6

This tutorial was written by Jemima ~ FEBRUARY 2014
Copyright © 2014 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

7f24f4da-blue.png
JF-Cicle12.pspimage
JF-Accents452.pspimage
Save to a folder on your computer

L&K57.bmp
Save to your PSP Textures folder

11HP-1020.jpg
Gold Foil.pspimage
Save to your PSP Patterns folder

********************************

Plugins

** EYE CANDY3 **
http://pspgroep.seniorennet.be/filterpagina.htm

********************************
You can drag this hand down the page with you to keep your place in the tut.

STEP 1 In your MATERIALS PALETTE Load the ' 11HP-1020 ' pattern in your foreground using these settings.
STEP 2 Open a new image 650 x 650 Transparent background PSP9: Colour Depth = 16 Million Colors (24bit) PSPX-X6: Colour Depth RGB = 8bits/channel Flood fill with the pattern VIEW >>> RULERS ADJUST >>> BLUR >>> RADIAL BLUR
STEP 3 Open up the JF-Circle12 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 2 Antialias = Checked Sample Merged = UNCHECKED PSP9 - X6: Check CONTIGUOUS PSPX - X6: There is no " Sample Merged" PSP9 - X6: ANTIALIAS = Outside Select the centre of the circle
STEP 4 SELECTIONS >>> MODIFY >>> EXPAND = 3 Activate Raster 1 EDIT >>> CLEAR SELECTIONS >>> MODIFY >>> EXPAND = 30 ADJUST >>> ADD/REMOVE NOISE >>> ADD NOISE
STEP 5 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL
STEP 6 SELECTIONS >>> MODIFY >>> EXPAND = 30 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL Same settings
STEP 7 SELECTIONS >>> MODIFY >>> EXPAND = 30 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL Same settings EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
STEP 8 EDIT >>> Repeat Drop Shadow.. change DIRECTION to 135 DESELECT
STEP 9 DELETE Raster 2 IMAGE >>> RESIZE = 85% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE
STEP 10 LAYERS >>> NEW RASTER LAYER Flood fill with LIGHT BLUE #9fb0f0 EFFECTS >>> TEXTURE EFFECTS >>> TEXTURE Texture =L&K57 LAYERS >>> ARRANGE >>> MOVE DOWN
STEP 11 In your MATERIALS PALETTE Load the ' Gold Foil ' pattern in your background using these settings.
STEP 12 LAYERS >>> NEW RASTER LAYER Flood fill with the background pattern SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK
STEP 13 Flood fill with the background pattern SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Repeat BOTH Drop Shadow effects Flood fill with the background pattern SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR Repeat BOTH Drop Shadow effects DESELECT LAYERS >>> ARRANGE >>> BRING TO TOP
STEP 14 LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 40 Repeat BOTH Drop Shadow effects Flood fill with the background pattern SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Repeat BOTH Drop Shadow effects
STEP 15 Flood fill with the background pattern SELECTIONS >>> MODIFY >>> CONTRACT = 4 EDIT >>> CLEAR Repeat BOTH Drop Shadow effects Flood fill with the background pattern SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR Repeat BOTH Drop Shadow effects DESELECT LAYERS >>> MERGE >>> MERGE DOWN
STEP 16 Activate Raster 2 LAYERS >>> NEW RASTER LAYER Flood fill with the foreground pattern ADJUST >>> BLUR >>> AVERAGE
STEP 17 Activate Raster 1 With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X6: Check CONTIGUOUS PSPX - X6: There is no " Sample Merged" Select the centre of your image SELECTIONS >>> MODIFY >>> EXPAND = 3 Activate Raster 4 EDIT >>> CLEAR DESELECT
STEP 18 Activate Raster 3 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
STEP 19 EDIT >>> Repeat Drop Shadow.. change DIRECTION to 135 ADJUST >>> SHARPNESS >>> SHARPEN
STEP 20 Open up the JF-Accents452 image in your PSP workspace Activate Raster 2 Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. EFFECTS >>> IMAGE EFFECTS >>> OFFSET
STEP 21 LAYERS >>> DUPLICATE IMAGE >>> FLIP LAYERS >>> MERGE >>> MERGE DOWN LAYERS >>> DUPLICATE PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX6: IMAGE >>> FREE ROTATE = LEFT 90 Ensure "All layers" is UNCHECKED
STEP 22 LAYERS >>> MERGE >>> MERGE DOWN LAYERS >>> DUPLICATE PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = LEFT 45 Ensure "All layers" is UNCHECKED PSPX - PSPX6: IMAGE >>> FREE ROTATE = LEFT 45 Ensure "All layers" is UNCHECKED LAYERS >>> MERGE >>> MERGE DOWN
STEP 23 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW Same settings EDIT >>> Repeat Drop Shadow.. change DIRECTION to 315 ADJUST >>> SHARPNESS >>> SHARPEN Activate Raster 1 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW Same settings EDIT >>> Repeat Drop Shadow.. change DIRECTION to 135 CLOSE Raster 2 LAYERS >>> MERGE >>> MERGE VISIBLE OPENRaster 2 Save as .pspimage image
STEP 24 Open up the 7f24f4da-blue image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. IMAGE >>> RESIZE = 80% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> IMAGE EFFECTS >>> OFFSET Horizontal = 0 Vertical = 20 Edge Mode = Transparent
STEP 25 CLOSE Raster 1 Choose your FREEHAND SELECTION TOOL Selection Type = Point to Point Mode = Replace Feather = 0 Smoothing = 2 Antialias = Checked Select the area shown
STEP 26 OPEN Raster 1 EDIT >>> CLEAR DESELECT
STEP 27 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> PERSPECTIVE SHADOW
STEP 28 LAYERS >>> NEW RASTER LAYER Select your TEXT tool and with a font of your choice add your name
STEP 29 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image

TESTERS RESULTS

Page designed by



for