STEP 1
Open a new image 600 x 600
Transparent background
PSPX - X2: Colour Depth = 8bits/channel
PSPX3: Colour Depth RGB = 8bits/channel
|
STEP 2
Open up the wall image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
Reposition with your MOVER tool
Rename this layer wall
|
|
STEP 3
With your MAGIC WAND
Mode = Replace
Match Mode = RGB Value
Tolerance = 0
Feather = 0
Antialias = UNchecked
Sample Merged = UNCHECKED
PSP9 - X3: Check CONTIGUOUS
PSPX - X3: There is no " Sample Merged"
PSPX - X3: Use all layers = UNChecked
Select the lower transparent area
SELECTIONS >>> MODIFY >>> EXPAND = 4
ACTIVATE Raster 1
Flood fill with WHITE
DESELECT
|
|
STEP 4
EFFECTS >>> TEXTURE EFFECTS >>> SCULPTURE
COLOUR = #c0c0c0
Pattern = textured07-sandi
ADJUST >>> SHARPNESS >>> SHARPEN MORE
Rename this layer floor
|
STEP 5
Activate the wall layer
With your MAGIC WAND
Same settings
Select the top transparent area
SELECTIONS >>> MODIFY >>> EXPAND = 4
LAYERS >>> NEW RASTER LAYER
LAYERS >>> ARRANGE >>> MOVE DOWN
Flood fill with
#ead4ba
DESELECT
Rename this layer ceiling |
|
STEP 6
Activate the wall layer
Open up the 3 paintings image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
Reposition with your MOVER tool
Rename this layer paintings
|
|
.STEP 7
Now, with the last painting I'll show you how I got the perspective.
Open up the soft-watch-1954 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 50%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
Reposition with your MOVER tool |
|
STEP 8
Select your DEFORMATION tool
Mode = PERSPECTIVE
use default settings
PSPX-X3:Select your PICK tool
Drag the top left node up
Click the RESET RECTANGLE arrow
|
STEP 9
Change the Mode = SCALE
Adjust the height and width by moving the
centre top/bottom and side nodes.
Click the RESET RECTANGLE arrow
ADJUST >>> SHARPNESS >>> SHARPEN
|
|
STEP 10
Select your MOVER tool to disengage
the Deformation / Pick tool
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>>
DROP SHADOW
LAYERS >>> MERGE >>> MERGE DOWN
|
|
STEP 11
Open up the frame image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
Rename this layer frame
|
|
STEP 12
Open up the Furniture71_dede image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 50%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
Select your DEFORMATION tool
Mode = SCALE
use default settings
PSPX-X3:Select your PICK tool
Drag the centre bottom node down a little
|
|
Click the RESET RECTANGLE arrow
Select your MOVER tool to disengage
the Deformation / Pick tool
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>>
DROP SHADOW
Same settings
Reposition with your MOVER tool
Rename this layer furniture
|
|
STEP 13
Open up the cccvictable1 image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 50%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
Reposition with your MOVER tool
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>>
DROP SHADOW
Same settings
LAYERS >>> MERGE >>> MERGE DOWN
|
|
STEP 14
Open up the dd_chandelier_R image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 50%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
LAYERS >>> DUPLICATE
LAYERS >>> MERGE >>> MERGE DOWN
Reposition with your MOVER tool
Rename this layer lights
|
|
STEP 15
LAYERS >>> DUPLICATE
IMAGE >>> RESIZE = 50%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
ADJUST >>> SHARPNESS >>> SHARPEN
Reposition with your MOVER tool
LAYERS >>> MERGE >>> MERGE DOWN
|
|
STEP 16
ACTIVATE the ceiling layer
Choose your SELECTION TOOL
Selection Type = Ellipse
Mode = Replace
Feather = 0
Antialias = Checked
Create a small ellipse as shown
|
|
STEP 17
Flood fill with GREY #c0c0c0
DESELECT
Save as .psp image
|
|
OK... That's Dali's Gallery done... now we'll mess with the artist himself *S*
|
STEP 18
ACTIVATE the furniture layer
Open up the celebrity-caricature-2_shl image
in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 82%
Ensure "Resize all layers" is UNCHECKED
Resample using WEIGHTED AVERAGE
Reposition with your MOVER tool
Rename this layer dali 1
|
|
STEP 19
LAYERS >>> DUPLICATE
Rename this layer dali 2
Select your PUSH BRUSH tool
PRESET = +Round 05
Zoom in on the eyes and remove the black section of the eyes
|
STEP 20
Select your SOFTEN BRUSH tool
PRESET = +Round 05
and soften the pixels you altered with the Push Brush
|
STEP 21
LAYERS >>> DUPLICATE
Rename this layer dali 3
LAYERS >>> DUPLICATE
Rename this layer dali 4
LAYERS >>> DUPLICATE
Rename this layer dali 5
Close layers dali 2, dali 3, dali 4, dali 5 |
STEP 22
ACTIVATE layer dali 1
Choose your FREEHAND SELECTION TOOL
Selection Type = Point to Point
Mode = Replace
Feather = 1
Antialias = Checked
ZOOM in and select the eye shown |
|
STEP 23
In your LAYER PALETTE
Right click on dali 1 layer and select
"Promote selection to layer"
Rename the promoted layer left eye
DESELECT |
|
STEP 24
ACTIVATE layer dali 1
Choose your FREEHAND SELECTION TOOL
Same settings
ZOOM in and select the eye shown |
|
STEP 25
In your LAYER PALETTE
Right click on dali 1 layer and select
"Promote selection to layer"
Rename the promoted layer right eye
DESELECT |
|
STEP 26
CLOSE layer dali 1
ACTIVATE the left eye layer
Right click on the Title Bar and
select COPY from the options
ACTIVATE the dali 2 layer
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options.
Place on left eye as shown
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options
Place on right eye as shown
DESELECT
|
|
STEP 27
CLOSE layer dali 2
ACTIVATE the right eye layer
Right click on the Title Bar and
select COPY from the options
ACTIVATE the dali 3 layer
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options.
Place on left eye as shown
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options
Place on right eye as shown
DESELECT |
|
STEP 28
CLOSE layer dali 3
The right eye layer should still be active
ACTIVATE the dali 4 layer
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options.
Place on left eye as shown
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options
Place on right eye as shown
DESELECT |
|
STEP 29
CLOSE layer dali 4
ACTIVATE the left eye layer
Right click on the Title Bar and
select COPY from the options
ACTIVATE the dali 5 layer
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options.
Place on left eye as shown
Right click on the Title Bar of your tag image
and select PASTE AS NEW SELECTION from the options
Place on right eye as shown
DESELECT |
|
STEP 30
Save as .psp image
So you don't lose all your hard work.
|
STEP 30
CLOSE layer dali 5
ACTIVATE the dali 2 layer
Choose your FREEHAND SELECTION TOOL
Selection Type = Point to Point
Mode = Replace
Feather = 0
Antialias = UNChecked
Select the throat area shown
Depress your SHIFT key
and select the lip area shown
|
|
STEP 31
EFFECTS >>> DISTORTION EFFECTS >>> PUNCH
Strength = 30%
ACTIVATE dali 4
EDIT >>> Repeat Punch
ACTIVATE dali 5
EFFECTS >>> DISTORTION EFFECTS >>> PINCH
Strength = 30%
ACTIVATE dali 3
EDIT >>> Repeat Pinch
DESELECT
|
STEP 32
ACTIVATE the furniture layer
LAYERS >> NEW RASTER LAYER
Select your TEXT TOOL
with font and settings of your choice
add your name to the bottom right corner of the layer.
Rename this layer name.
|
|
Lets animate
|
STEP 33
Set up LAYER PALETTE as shown
Right click on Title Bar and select
Copy merged from the options
|
|
STEP 34
In ANIMATION SHOP
Right click the workspace and select
'Paste As New Animation' from the options.
Back to PSP
CLOSE dali 1
OPEN dali 2
Right click on Title Bar and select
Copy merged from the options
|
STEP 35
In ANIMATION SHOP
Right click top of frame image and select
'Paste After Current Frame' from the options
Back to PSP
CLOSE dali 2
OPEN dali 3
Right click on Title Bar and select Copy merged from the options
|
STEP 36
In ANIMATION SHOP
Right click top of frame image and select
'Paste After Current Frame' from the options
Back to PSP
CLOSE dali 3
OPEN dali 4
Right click on Title Bar and select Copy merged from the options |
STEP 37
In ANIMATION SHOP
Right click top of frame image and select
'Paste After Current Frame' from the options
Back to PSP
CLOSE dali 4
OPEN dali 5
Right click on Title Bar and select Copy merged from the options |
STEP 38
Edit >> Select All
Right click on Title Bar of frames
Select 'Frame Properties' from the options
Display time =50
|
|
STEP 39
View >> Animation
and while it is still running,
File >> Save As
Locate the folder in which you wish to save it.
Name your animation.
With the Gif Optimiser keep pressing NEXT
until you get to the last one... click FINISH
Close the Animation
Close the frames.
Close Animation Shop |
|
|