PIERROT FRAME
PSP8 to PSPX3

This tutorial was written by Jemima ~ MAY 2013
Copyright © 2013 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

tube Pierrot.pspimage
Save to a folder on your computer

Arguld10.bmp
005_file0032.jpg
Save to your PSP Patterns folder
PSP8: C:\Program Files\Jasc Software\Paint Shop Pro 8\Patterns
PSP9: C:\Program Files\Jasc Software\Paint Shop Pro 9\Patterns
PSPX: C:\Program Files\Corel\Corel Paint Shop Pro X\Patterns
PSPXI / X2: C:\Program Files\Corel\Corel Paint Shop Pro Photo X2\Corel_08
PSPX3: C:\Program Files\Corel\X3\PSPClassic\Corel_08

********************************

Plugins

** EYE CANDY3 **
http://pspgroep.seniorennet.be/filterpagina.htm


********************************
You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open a new image 500 x 600 Transparent background PSPX - X2: Colour Depth = 8bits/channel PSPX3: Colour Depth RGB = 8bits/channel Flood fill with BROWN #3c2801 SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 1 EDIT >>> CLEAR
STEP 2 In your MATERIALS PALETTE load 005_file0032 pattern in the foreground and Arguld10 pattern in the background using these settings
STEP 3 Flood fill with Arguld10 pattern SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK Flood fill with 005_file0032 pattern
STEP 4 SELECTIONS >>> MODIFY >>> CONTRACT = 15 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK Flood fill with Arguld10 pattern
STEP 5 SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK Flood fill with 005_file0032 pattern
STEP 6 SELECTIONS >>> MODIFY >>> CONTRACT = 10 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK Flood fill with Arguld10 pattern
STEP 7 SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK SELECTIONS >>> MODIFY >>> CONTRACT = 20 Flood fill with Arguld10 pattern
STEP 8 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK Flood fill with 005_file0032 pattern
STEP 9 SELECTIONS >>> MODIFY >>> CONTRACT = 10 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK Flood fill with Arguld10 pattern
STEP 10 SELECTIONS >>> MODIFY >>> CONTRACT = 3 EDIT >>> CLEAR EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 100 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK DESELECT
STEP 11 With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X3: Check CONTIGUOUS PSPX - X3: There is no " Sample Merged" PSPX - X3: Use all layers = UNChecked Select the transparent area shown
STEP 12 LAYERS >>> NEW RASTER LAYER LAYERS >>> ARRANGE >>> MOVE DOWN SELECTIONS >>> MODIFY >>> EXPAND = 3 Flood fill with WHITE EFFECTS >>> TEXTURE EFFECTS >>> WEAVE
STEP 13 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL COLOUR = #fed27e
STEP 14 DESELECT ADJUST >>> SHARPNESS >>> SHARPEN
STEP 15 LAYERS >>> DUPLICATE PSP8 - PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX3: IMAGE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED
STEP 16 ACTIVATE RASTER 1 LAYERS >>> DUPLICATE PSP8 - PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX3: IMAGE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED
STEP 17 ACTIVATE RASTER 1 LAYERS >>> ARRANGE >>> BRING TO TOP
STEP 18 EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
STEP 19 EDIT >>> Repeat Drop Shadow.. change DIRECTION to 135
STEP 20 ACTIVATE Copy of Raster 1 EDIT >>> Repeat Drop Shadow.. same settings EDIT >>> Repeat Drop Shadow.. change DIRECTION to 315
STEP 21 LAYERS >>> MERGE >>> MERGE VISIBLE Save as .pspimage image
STEP 22 Open up the tube Pierrot image in your PSP workspace Activate the Achtergrond layer Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. LAYERS >>> ARRANGE >>> MOVE DOWN Select your RASTER DEFORM tool Mode = SCALE use default settings PSPX - X3:Select your PICK tool Adjust as shown
STEP 23 Click the RESET RECTANGLE arrow Select another tool to disengage the DEFORMATION / PICK TOOL ADJUST >>> SHARPNESS >>> SHARPEN MORE Back to the tube Pierrot image Activate the Groep - Raster 1 layer Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool
STEP 24 LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image

TESTERS RESULTS

Page designed by



for