BELLA FRAME
PSP8 to PSPX3

This tutorial was written by Jemima ~ SEPTEMBER 2013
Copyright © 2013 ~ Jemima ~ All rights reserved

This was created using PSP9 but can be adapted for other versions of PSP.

********************************

No artists or copyright infringement is intended on any of the tubes used in this tutorial.
The tubes were acquired in good faith as to their legality.
If there is a problem, please contact the author and the image/s will be removed.

You will need the following to complete this tutorial

Materials

Image235j.psp
Weeping~kkk2003.psp
mr_549_Morning.pspimage
Save to a folder on your computer

********************************

Plugins

** EYE CANDY3 **
http://pspgroep.seniorennet.be/filterpagina.htm


********************************
You can drag this hand down the page with you to keep your place in the tut.

STEP 1 Open a new image 600 x 600 Transparent background PSPX - X2: Colour Depth = 8bits/channel PSPX3: Colour Depth RGB = 8bits/channel
STEP 2 Open up the Image235j image in your PSP workspace Activate the Merged 6 layer Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED PSPX - PSPX3: IMAGE >>> FREE ROTATE = RIGHT 90 Ensure "All layers" is UNCHECKED
STEP 3 LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET
STEP 4 ACTIVATE Raster 2 LAYERS >>> DUPLICATE EFFECTS >>> IMAGE EFFECTS >>> OFFSET
STEP 5 CLOSE Raster 1 LAYERS >>> MERGE >>> MERGE VISIBLE EFFECTS >>> REFLECTION EFFECTS >>> KALEIDOSCOPE ADJUST >>> SHARPNESS >>> SHARPEN
STEP 6 LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 97% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN
STEP 7 REPEAT STEP 6 ...3 more times until you have 5 frames LAYERS >>> MERGE >>> MERGE VISIBLE
STEP 8 LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 85% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE ADJUST >>> SHARPNESS >>> SHARPEN EFFECTS >>> DISTORTION EFFECTS >>> WAVE
STEP 9 PSP9: IMAGE >>> ROTATE >>> ROTATE CLOCKWISE 90 PSPX - PSPX3: IMAGE >>> ROTATE RIGHT EFFECTS >>> DISTORTION EFFECTS >>> WAVE Same settings PSP9: IMAGE >>> ROTATE >>> ROTATE COUNTER CLOCKWISE 90 PSPX - PSPX3: IMAGE >>> ROTATE LEFT
STEP 10 LAYERS >>> DUPLICATE IMAGE >>> RESIZE = 85% Ensure "Resize all layers" is UNCHECKED Resample using WEIGHTED AVERAGE PSP9: IMAGE >>> ROTATE >>> FREE ROTATE = RIGHT 45 Ensure "All layers" is UNCHECKED PSPX - PSPX3: IMAGE >>> FREE ROTATE = RIGHT 45 Ensure "All layers" is UNCHECKED ADJUST >>> SHARPNESS >>> SHARPEN
STEP 11 Choose your SELECTION TOOL Selection Type = Rectangle Mode = Replace Feather = 0 Antialias = Checked Select the pattern in the centre of your image Hit your DELETE key
STEP 12 ACTIVATE the Copy of Merged layer Hit your DELETE key ACTIVATE the Merged layer Hit your DELETE key DESELECT
STEP 13 ACTIVATE the Copy of Merged layer With your MAGIC WAND Mode = Replace Match Mode = RGB Value Tolerance = 0 Feather = 0 Antialias = UNchecked Sample Merged = UNCHECKED PSP9 - X3: Check CONTIGUOUS PSPX - X3: There is no " Sample Merged" PSPX - X3: Use all layers = UNChecked PSP9 - X3: ANTIALIAS = Outside Select the centre transparent area SELECTIONS >>> MODIFY >>> EXPAND = 5 SELECTIONS >>> INVERT OPEN & ACTIVATE RASTER 1 Flood fill with #ad7451
STEP 14 EFFECTS >>> TEXTURE EFFECTS >>> BLINDS DESELECT
STEP 15 ACTIVATE the Merged layer With your MAGIC WAND.... Same settings. Select the area outside the border
STEP 16 ACTIVATE Raster 1 EFFECTS >>> TEXTURE EFFECTS >>> BLINDS Same settings but CHECK "Horizontal" ADJUST >>> BRIGHTNESS and CONTRAST >>> BRIGHTNESS/CONTRAST BRIGHTNESS = 35 CONTRAST = 15 DESELECT
STEP 17 ACTIVATE Copy (2) of Merged With your MAGIC WAND.... Same settings. Select the area outside the border
STEP 18 SELECTIONS >>> INVERT SELECTIONS >>> MODIFY >>> CONTRACT = 5 SELECTIONS >>> INVERT ACTIVATE Raster 1 LAYERS >>> NEW RASTER LAYER LAYERS >>> ARRANGE >>> MOVE DOWN Flood fill with #ad7451 DESELECT
STEP 19 ACTIVATE the Merged layer EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
STEP 20 EDIT >>> Repeat Drop Shadow.. change DIRECTION to 135
STEP 21 ACTIVATE Copy of Merged EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
STEP 22 EDIT >>> Repeat Drop Shadow.. change DIRECTION to 135
STEP 23 ACTIVATE Copy (2) of Merged EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW Same settings EDIT >>> Repeat Drop Shadow.. change DIRECTION to 315 LAYERS >>> MERGE >>> MERGE VISIBLE
STEP 24 LAYERS >>> NEW RASTER LAYER SELECTIONS >>> SELECT ALL SELECTIONS >>> MODIFY >>> CONTRACT = 5 SELECTIONS >>> INVERT Flood fill with #ad7451 EFFECTS >>> 3D EFFECTS >>> INNER BEVEL
STEP 25 EFFECTS >>> 3D EFFECTS >>> DROP SHADOW Vertical & Horizontal offsets = 1 Colour = Black Opacity = 70 Blur = 0 Repeat Drop Shadow effect changing Vertical & Horizontal Offsets to - ( minus ) 1 Click OK DESELECT
STEP 26 LAYERS >>> MERGE >>> MERGE VISIBLE Save as .pspimage image
STEP 27 LAYERS >>> NEW RASTER LAYER LAYERS >>> ARRANGE >>> MOVE DOWN Flood fill with #f6bf9e Open up the mr_549_Morning image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool
STEP 28 Open up the Weeping~kkk2003 image in your PSP workspace Right click on the Title Bar and select COPY from the options Right click on the Title Bar of your frame image and select PASTE AS NEW LAYER from the options. Reposition with your MOVER tool
STEP 29 ADD your Name LAYERS >>> MERGE >>> MERGE ALL (Flatten) Save as .jpg image

TESTERS RESULTS


Page designed by



for