LADY IN RED
PSP8 to PSPXII
This tutorial was
written by Jemima ~ 2007
Copyright © 2007/10 ~ Jemima
~ All rights reserved
********************************
This was created using PSP9 but can be adapted for other versions of PSP.
You will need the
following to complete this tutorial
Materials
RIGHT CLICK >>> SAVE TARGET AS
JF_TemplateV6.psp
km06b.jpg
JF_blue_eyes.psp
diamondheartchoker~sdh.psp
kh hatbox nm tinytube.pspimage
lady in red~FBR 2-13-05.psp
Save to a folder on your computer
DD3.jpg
Save to your PSP Patterns folder
PSP8: C:\Program Files\Jasc Software\Paint Shop Pro 8\Patterns
PSP9: C:\Program Files\Jasc Software\Paint Shop Pro 9\Patterns
PSPX: C:\Program Files\Corel\Corel Paint Shop Pro X\Patterns
PSPXI / X2: C:\Program Files\Corel\Corel Paint Shop Pro Photo X2\Corel_08
Plugins
** EYE CANDY3 **
http://www.chezkiki.com/les_filtres.htm
OR
http://www.pircnet.com/downloads.html
********************************
REMEMBER TO SAVE YOUR WORK OFTEN
********************************
Open all your supplied images in PSP and minimize
Open a new image 600 x 450
Transparent background
PSPX-XII: Colour Depth = 8bits/channel
Flood fill with WHITE
Open up the JF_TemplateV6.psp image in your PSP workspace
(Activate the 'borders' layer)
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your new tag image
and select PASTE AS NEW LAYER from the options.
Choose your SELECTION TOOL
Selection Type = Rectangle
Mode = Replace
Feather = 0
Antialias = Checked
Draw a rectangle around the 'borders'
Click inside the marching ants to select the borders
and flood fill with RED " #ff0000 "
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 70
Blur = 0
Repeat Drop Shadow effect changing
Vertical & Horizontal Offsets to - ( minus ) 1
Click OK
DESELECT
With your MAGIC WAND
Mode = Replace
Match Mode = RGB Value
Tolerance = 0
Feather = 0
Antialias = UNchecked
Sample Merged = UNCHECKED
PSP9 - XII: Check CONTIGUOUS
PSPX - XII: There is no " Sample Merged"
PSPX - XII: Use all layers = UNChecked
Select the area shown below
LAYERS >>> NEW RASTER LAYER
LAYERS >>> ARRANGE >>> MOVE DOWN
In your MATERIALS PALETTE
Load the ' DD3 ' pattern in your foreground
using the settings below.
Flood fill with the pattern
DESELECT
Open up the JF_TemplateV6.psp image in your PSP workspace
(Activate the 'centre' layer)
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your new tag image
and select PASTE AS NEW LAYER from the options.
LAYERS >>> ARRANGE >>> BRING TO TOP
EFFECTS >>> TEXTURE EFFECTS >>> BLINDS
ACTIVATE RASTER 1
Open up the km06b.jpg image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your new tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 60%
Ensure "Resize all layers" is UNCHECKED
PSP8 - PSP9: Select your DEFORMATION tool
Mode = SCALE
use default settings and move the centre bottom node up, as shown below
PSPX - XII: Select your PICK tool
use default settings and move the centre bottom node up
and centre top node up
, as shown below
.
Click the RESET RECTANGLE arrow
Change the MODE to PERSPECTIVE
Slide the top left node to the right in line with the 190 mark on the top ruler.
Click the RESET RECTANGLE arrow
ACTIVATE RASTER 2 (The border lines)
With your MAGIC WAND ...
Same settings.. select the area shown
ACTIVATE RASTER 5
EFFECTS >>> TEXTURE EFFECTS >>> BLINDS
DESELECT
ACTIVATE RASTER 2 (The border lines)
With your MAGIC WAND ... Same settings.. select the area shown
ACTIVATE RASTER 5
EFFECTS >>> TEXTURE EFFECTS >>> BLINDS
Same settings BUT this time check HORIZONTAL.
DESELECT
ACTIVATE RASTER 4
LAYERS >>> NEW RASTER LAYER
Choose your SELECTION TOOL then click on the CUSTOM SELECTION
symbol
Flood fill with RED
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 70
Blur = 0
Repeat Drop Shadow effect changing
Vertical & Horizontal Offsets to - ( minus ) 1
Click OK
DESELECT
STEP 2
LAYERS >>> DUPLICATE
IMAGE >>> RESIZE = 90%
Ensure "Resize all layers" is UNCHECKED
Reposition with your MOVER tool
STEP 3
LAYERS >>> DUPLICATE
IMAGE >>> RESIZE = 90%
Ensure "Resize all layers" is UNCHECKED
Reposition with your MOVER tool
STEP 4
LAYERS >>> DUPLICATE
IMAGE >>> RESIZE = 90%
Ensure "Resize all layers" is UNCHECKED
Reposition with your MOVER tool
REPEAT UNTIL YOU HAVE 9 STEPS
In your LAYER PALETTE CLOSE ...
RASTER 1 TO RASTER 5
LAYERS >>> MERGE >>> MERGE VISIBLE
OPEN ALL LAYERS
Open up the JF_blue_eyes.psp image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your new tag image
and select PASTE AS NEW LAYER from the options.
Reposition with your MOVER tool
Select your DEFORMATION tool
Mode = SCALE
PSPX - XII:Select your PICK tool
use default settings and move the centre LEFT node to the right.. to the 270 mark on top ruler,
and the centre bottom node down to meet the red border,
as shown below
Click the RESET RECTANGLE arrow
LAYERS >>> DUPLICATE
IMAGE >>> MIRROR
In your LAYER PALETTE drag this layer down beteen Raster 1 and Raster 5
change the OPACITY to 12%
Change the BLEND MODE to LUMINANCE (L)
.
EFFECTS >>> EDGE EFFECTS >>> ENHANCE MORE
LAYERS >>> DUPLICATE
EFFECTS >>> EDGE EFFECTS >>> ENHANCE
ACTIVATE RASTER 6
ADJUST >>> SHARPNESS >>> SHARPEN
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> PERSPECTIVE SHADOW
.
Open up the diamondheartchoker~sdh.psp image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your new tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 40%
Ensure "Resize all layers" is UNCHECKED
Reposition with your MOVER tool
PSP8 - PSP9: Select your DEFORMATION tool
Mode = SCALE
PSPX - XII:Select your PICK tool
Mode = SCALE
use default settings and move the centre LEFT node to the right,
and the centre top node down as shown below
Click the RESET RECTANGLE arrow
EFFECTS >>> EDGE EFFECTS >>> ENHANCE MORE
Open up the lady in red~FBR 2-13-05.psp image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your new tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 40%
Ensure "Resize all layers" is UNCHECKED
Reposition with your MOVER tool
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> PERSPECTIVE SHADOW
Same Settings
Open up the kh hatbox nm tinytube.pspimage image in your PSP workspace
Right click on the Title Bar and select COPY from the options
Right click on the Title Bar of your new tag image
and select PASTE AS NEW LAYER from the options.
IMAGE >>> RESIZE = 30%
Ensure "Resize all layers" is UNCHECKED
Reposition with your MOVER tool
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> PERSPECTIVE SHADOW
Same Settings
ACTIVATE RASTER 2
With your MAGIC WAND ...
Same settings..
Select the OUTER border area
ACTIVATE RASTER 1
EFFECTS >>> TEXTURE EFFECTS >>> BLINDS
SELECTIONS >>> INVERT
ACTIVATE RASTER 2
Click inside the marching ants to select the borders
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
DESELECT
ACTIVATE RASTER 7 (The necklace)
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
Same settings
ACTIVATE RASTER 6
LAYERS >>> NEW RASTER LAYER
SELECTIONS >>> SELECT ALL
Flood fill with RED
SELECTIONS >>> MODIFY >>> CONTRACT = 2
EDIT >>> CLEAR
DESELECT
EFFECTS >>> 3D EFFECTS >>> DROP SHADOW
Vertical & Horizontal offsets = 1
Colour = Black
Opacity = 70
Blur = 0
Repeat Drop Shadow effect changing
Vertical & Horizontal Offsets to - ( minus ) 1
Click OK
EFFECTS >>> PLUGINS >>> EYE CANDY 3 >>> DROP SHADOW
Same settings
LAYERS >>> MERGE >>> MERGE ALL (Flatten)
Save as .jpg image
TESTERS RESULTS
Page designed by
for
http://www.artistrypsp.com/
Copyright ©
2000-2010 Artistry In PSP / PSP Artistry
All rights reserved.
Unless specifically made available for
download,
no graphics or text may be removed from
this site for any reason
without written permission from Artistry
In PSP / PSP Artistry
|